Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe · Louisiana
EXCEL Fabrication
Gonzales, LA · ~63 workers · 8 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 0.2
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
EXCEL Fabrication runs at 7% of its industry's injury rate - far safer than the typical Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe workplace, earning a grade A.
EXCEL Fabrication: 0.2 TCR = 7% of Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe BLS 3.3 · 8y Form 300A (see methodology below)
EXCEL Fabrication safety composite
EXCEL Fabrication scores strongest on total case rate (tcr) (safer than 99% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
80/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- A 0.22 per 100 workers
Safer than 99% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 81% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
EXCEL Fabrication held a steady TCR band
EXCEL Fabrication's TCR held near 0.0 from 0.0 in 2016 to 0.0 in 2023. Peak filing year was 2017 at 1.7 TCR. In 2023, DART was 0× this establishment's average TCR (severity share of cases).
2016=0.0 · 2017=1.7 · 2018=0.0 · 2019=0.0 · 2020=0.0 · 2021=0.0 · 2022=0.0 · 2023=0.0
OSHA ITA Form 300A scorecard
Establishment book 332996 · Gonzales, LA AT/BELOW-IND · SMALL
Grade A · TCR 0.2 · 7% of ind
- DART 0.0 DART
- RANK #1/19
- PHOTO Katy, Tx (OPD Office…
- BOOK 8y book
- INJ 1 inj
- SIZE ~63 FTE
Nearest TCR peer: Katy, Tx (OPD Office/Shop) (0.0 TCR gap)
Read with this employer → · Industry book → · Louisiana employers → · Look up another →
EXCEL Fabrication in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Tenaris Brookf 0.3
Tenaris Brookfield
0.3 TCR
- This site 0.2
EXCEL Fabrication
0.2 TCR
- Katy, Tx (OPD 0.2
Katy, Tx (OPD Office/Shop)
0.2 TCR
- Valtronics Sol 0.2
Valtronics Solutions Inc.
0.2 TCR
- Wiltew, Inc 0.2
Wiltew, Inc
0.2 TCR
What this shows EXCEL Fabrication averages 0.2 TCR (7% of the Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe BLS benchmark).
EXCEL Fabrication TCR series: 2016=0 · 2017=1.7 · 2018=0 · 2019=0 · 2020=0 · 2021=0 · 2022=0 · 2023=0 · BLS 3.3
Where EXCEL Fabrication falls in its industry
337 Pipe fabricating (i.e., bendin establishmentsSafer than 99% of graded establishments in this industry, whose median TCR is 3.3.
Narrower to Louisiana alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 19 Pipe fabricating (i.e., bendin employers in Louisiana.
EXCEL Fabrication has more employees than the Pipe fabricating (i.e., bending, cutting median and a lower injury rate than the industry's median TCR of 3.3. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 1.7 | 0.0 | 1 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332996 · LA · Gonzales
337 Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe employers nationwide with a credible TCR · 6,723 rated employers in Louisiana with headcount on file · 91 employers in Gonzales, LA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Katy, Tx (OPD Office/Shop) | 0.2 TCR |
| NAICS-TCR | Valtronics Solutions Inc. | 0.2 TCR |
| NAICS-TCR | Wiltew, Inc | 0.2 TCR |
| NAICS-TCR | Tenaris Brookfield | 0.3 TCR |
| STATE-SIZE | Concordia Electric Cooperative | 63 FTE |
| STATE-SIZE | Ratcliff Construction | 63 FTE |
| STATE-SIZE | Hernandez Consulting Inc | 63 FTE |
| STATE-SIZE | Aeon PEC | 63 FTE |
| CITY-NEAR | Specialty Welding and Turnarounds, LLC | 2,051 FTE |
| CITY-NEAR | 532 | 511 FTE |
| CITY-NEAR | Smith Tank & Steel, Inc. | 450 FTE |
| CITY-NEAR | WM 532 | 435 FTE |
| NAT-TCR | Everett Laboratory | 0.2 TCR |
| NAT-TCR | Central Home Health Services of Texas, LLC | 0.2 TCR |
| NAT-TCR | Coty USLLC | 0.2 TCR |
| NAT-TCR | Omaha NE (9 Cag Dr) | 0.2 TCR |
| NAT-SIZE | The Lexington Assisted Living Center | 63 FTE |
| NAT-SIZE | Washington-Lexington | 63 FTE |
| NAT-SIZE | Peace Haven Association | 63 FTE |
| NAT-SIZE | Loudon TN | 63 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.