Valves, industrial-type (e.g., check, gate, globe, relief, safety), manufacturing · Kansas

Forum Energy Technologies - Madison

Madison, KS · ~45 workers · 6 years of OSHA Injury Tracking Application data.

A
Excellent Safety Record
1.3
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Forum Energy Technologies - Madison runs at 40% of its industry's injury rate - far safer than the typical Valves, industrial-type (e.g., check, gate, globe, relief, safety), manufacturing workplace, earning a grade A.

Forum Energy Technologies - Madison: 1.3 TCR = 40% of Valves, industrial-type (e.g., check, gate, globe, relief, safety), manufacturing BLS 3.3 · 6y Form 300A (see methodology below)

Forum Energy Technologies - Madison safety composite

Forum Energy Technologies - Madison scores strongest on dart rate (safer than 78% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

66/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 1.33 per 100 workers

Safer than 66% of industry peers

DART rate
B 0 per 100 workers

Safer than 78% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Forum Energy Technologies - Madison held a steady TCR band

Forum Energy Technologies - Madison's TCR held near 0.0 from 0.0 in 2016 to 0.0 in 2021. Peak filing year was 2020 at 8.0 TCR. In 2021, DART was 0× this establishment's average TCR (severity share of cases).

2016=0.0 · 2017=0.0 · 2018=0.0 · 2019=0.0 · 2020=8.0 · 2021=0.0

OSHA ITA Form 300A scorecard

Establishment book 332911 · Madison, KS AT/BELOW-IND · SMALL

Grade A · TCR 1.3 · 40% of ind

  • DART 0.0 DART
  • RANK #2/6
  • PHOTO Midland Manufacturing
  • BOOK 6y book
  • INJ 1 inj
  • SIZE ~45 FTE

Nearest TCR peer: Midland Manufacturing (0.0 TCR gap)

Read with this employer → · Industry book → · Kansas employers → · Look up another →

Forum Energy Technologies - Madison in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Forum Energy Technologies - Madison averages 1.3 TCR (40% of the Valves, industrial-type (e.g., check, gate, globe, relief, safety), manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Forum Energy Technologies - Madison TCR series: 2016=0 · 2017=0 · 2018=0 · 2019=0 · 2020=8 · 2021=0 · BLS 3.3

Where Forum Energy Technologies - Madison falls in its industry

298 Valves, industrial-type (e.g., establishments

Safer than 66% of graded establishments in this industry, whose median TCR is 2.0.

More dangerous than peersSafer than peers

Narrower to Kansas alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 6 Valves, industrial-type (e.g., employers in Kansas.

Forum Energy Technologies - Madison (45 employees, TCR 1.3) among 29 same-industry peers, split at the industry median of 92 employees and a TCR of 2.0 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600800 051015 Average employees Total Case Rate Forum Energy Technologies - Madison
Forum Energy Technologies - Madison (45 employees, TCR 1.3) among 29 same-industry peers, split at the industry median of 92 employees and a TCR of 2.0

Forum Energy Technologies - Madison has fewer employees than the Valves, industrial-type (e.g., check, ga median and a lower injury rate than the industry's median TCR of 2.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2021 0.0 0.0 0 0 0
2020 8.0 8.0 1 2 0
2019 0.0 0.0 0 0 0
2018 0.0 0.0 0 0 0
2017 0.0 0.0 0 0 0
2016 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332911 · KS · Madison

298 Valves, industrial-type (e.g., check, gate, globe, relief, safety), manufacturing employers nationwide with a credible TCR · 5,228 rated employers in Kansas with headcount on file · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Midland Manufacturing 1.3 TCR
NAICS-TCR Southeast Valve, Inc. 1.3 TCR
NAICS-TCR Fluid Connectors : Mauston 1.3 TCR
NAICS-TCR ABZ Valve 1.3 TCR
STATE-SIZE Shawnee Service Center 45 FTE
STATE-SIZE Wardcraft Homes Inc., 45 FTE
STATE-SIZE Roofmasters Roofing & Sheet Metal- Hays 45 FTE
STATE-SIZE Diamond Roofing Dodge City 45 FTE
NAT-TCR Bureau of Engraving 1.3 TCR
NAT-TCR Benchmark of Cullman, Inc 1.3 TCR
NAT-TCR Ohio CAT - Columbus HE 1.3 TCR
NAT-TCR 44361f - Ocala Fl Bin 1.3 TCR
NAT-SIZE Western Sky Dairy, LLC 45 FTE
NAT-SIZE Lj Walch Co Inc 45 FTE
NAT-SIZE 4769-809-Williams Sonoma 45 FTE
NAT-SIZE Envision 45 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.
Data sourced from official public datasets. See our methodology for details.