Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing · Alabama
Franklin Iron LLC - Aliceville
Aliceville, AL · ~54 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 9.2
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Franklin Iron LLC - Aliceville runs at 278% of its industry's injury rate - far more dangerous than the typical Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing workplace, earning a grade F.
Franklin Iron LLC - Aliceville: 9.2 TCR = 278% of Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing BLS 3.3 · 2y Form 300A (see methodology below)
Franklin Iron LLC - Aliceville safety composite
Franklin Iron LLC - Aliceville scores strongest on fatalities (safer than 52% of same-industry peers) and weakest on total case rate (tcr) (safer than 37%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
41/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 9.19 per 100 workers
Safer than 37% of industry peers
- DART rate
- D 4.76 per 100 workers
Safer than 37% of industry peers
- Fatalities
- D 0
Safer than 52% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Franklin Iron LLC - Aliceville: 8.8 → 9.5 TCR
Peak year 2024 @ 9.5 TCR · DART/TCR 0.52× in 2024
Franklin Iron LLC - Aliceville's TCR rose 0.7 from 8.8 in 2023 to 9.5 in 2024. In 2024, DART was 0.52× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 331511 · Aliceville, AL ABOVE-IND · SMALL
Grade F · TCR 9.2 · 278% of ind
- DART 4.8 DART
- RANK #15/18
- PHOTO Metal Technologies A…
- BOOK 2y book
- INJ 9 inj
- SIZE ~54 FTE
Nearest TCR peer: Metal Technologies Auburn, LLC (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Franklin Iron LLC - Aliceville in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Franklin Iron LLC - Aliceville
9.2 TCR
- Metal Technolo
Metal Technologies Auburn, LLC
9.2 TCR
- Dock Foundry L
Dock Foundry LLC
9.2 TCR
- Graham White F
Graham White Foundry 1201
9.2 TCR
- ALHAMBRA FOUND
ALHAMBRA FOUNDRY CO LTD
9.2 TCR
What this shows Franklin Iron LLC - Aliceville averages 9.2 TCR (278% of the Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing BLS benchmark).
Franklin Iron LLC - Aliceville TCR series: 2023=8.8 · 2024=9.5 · BLS 3.3
Where Franklin Iron LLC - Aliceville falls in its industry
272 Castings, unfinished iron (e.g establishmentsSafer than 37% of graded establishments in this industry, whose median TCR is 7.2.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #15 safest of 18 Castings, unfinished iron (e.g employers in Alabama.
Franklin Iron LLC - Aliceville has fewer employees than the Castings, unfinished iron (e.g., ductile median and a higher injury rate than the industry's median TCR of 7.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 9.5 | 4.8 | 4 | 0 | 0 |
| 2023 | 8.8 | 3.5 | 5 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331511 · AL · Aliceville
272 Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 5 employers in Aliceville, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Metal Technologies Auburn, LLC | 9.2 TCR |
| NAICS-TCR | Dock Foundry LLC | 9.2 TCR |
| NAICS-TCR | Graham White Foundry 1201 | 9.2 TCR |
| NAICS-TCR | ALHAMBRA FOUNDRY CO LTD | 9.2 TCR |
| STATE-SIZE | Rembrandt Foods Abbeville Operations | 54 FTE |
| STATE-SIZE | Western Division Jasper Complex | 54 FTE |
| STATE-SIZE | North Alabama Electric Cooperative | 54 FTE |
| STATE-SIZE | CCI Construction Services, LLC | 54 FTE |
| CITY-NEAR | Lewis Brothers Lumber Co., Inc. | 110 FTE |
| CITY-NEAR | Aliceville Manor Nursing Home | 105 FTE |
| CITY-NEAR | Westervelt Pellets I LLC | 39 FTE |
| CITY-NEAR | Westervelt Renewable Energy | 39 FTE |
| NAT-TCR | Sodexo at Sharp Grossmont Hospital Hskp | 9.2 TCR |
| NAT-TCR | PLAINVILLE | 9.2 TCR |
| NAT-TCR | JNB Mechanical Inc. | 9.2 TCR |
| NAT-TCR | Raley's 302-Galt | 9.2 TCR |
| NAT-SIZE | CBSI Marshall | 54 FTE |
| NAT-SIZE | Sungwon Catonsville LLC | 54 FTE |
| NAT-SIZE | The Scotts Company - Linden | 54 FTE |
| NAT-SIZE | Preferred Electrical Contractors, Inc. | 54 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.