Foundry casting molds manufacturing · Indiana
General Aluminum Manufacturing Company
Huntington, IN · ~75 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
General Aluminum Manufacturing Company runs at 141% of its industry's injury rate - more dangerous than the typical Foundry casting molds manufacturing workplace, earning a grade D.
General Aluminum Manufacturing Company: 4.7 TCR = 141% of Foundry casting molds manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
General Aluminum Manufacturing Company safety composite
General Aluminum Manufacturing Company scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 18%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
35/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.65 per 100 workers
Safer than 40% of industry peers
- DART rate
- F 3.84 per 100 workers
Safer than 18% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
General Aluminum Manufacturing Company: 4.7 → 5.8 TCR
Peak year 2022 @ 5.8 TCR · DART/TCR 0.83× in 2022
General Aluminum Manufacturing Company's TCR rose 1.1 from 4.7 in 2016 to 5.8 in 2022. In 2022, DART was 0.83× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 333511 · Huntington, IN ABOVE-IND · SMALL
Grade D · TCR 4.7 · 141% of ind
- DART 3.8 DART
- RANK #7/11
- PHOTO Engineered Plastic C…
- BOOK 3y book
- INJ 11 inj
- SIZE ~75 FTE
Nearest TCR peer: Engineered Plastic Components INC (0.0 TCR gap)
Read with this employer → · Industry book → · Indiana employers → · Look up another →
General Aluminum Manufacturing Company in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
General Aluminum Manufacturing Company
4.7 TCR
- Built-Rite
Built-Rite
4.7 TCR
- Service Tool &
Service Tool & Die, Inc.
4.7 TCR
- Engineered Pla
Engineered Plastic Components INC
4.6 TCR
- United Tool &
United Tool & Mold, Inc.
4.6 TCR
What this shows General Aluminum Manufacturing Company averages 4.7 TCR (141% of the Foundry casting molds manufacturing BLS benchmark).
General Aluminum Manufacturing Company TCR series: 2016=4.7 · 2019=3.5 · 2022=5.8 · BLS 3.3
Where General Aluminum Manufacturing Company falls in its industry
216 Foundry casting molds manufact establishmentsSafer than 40% of graded establishments in this industry, whose median TCR is 3.7.
Narrower to Indiana alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 11 Foundry casting molds manufact employers in Indiana.
General Aluminum Manufacturing Company has more employees than the Foundry casting molds manufacturing median and a higher injury rate than the industry's median TCR of 3.7. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2022 | 5.8 | 3.8 | 5 | 1 | 0 |
| 2019 | 3.5 | 1.2 | 3 | 0 | 0 |
| 2016 | 4.7 | 3.1 | 3 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
333511 · IN · Huntington
216 Foundry casting molds manufacturing employers nationwide with a credible TCR · 12,750 rated employers in Indiana with headcount on file · 59 employers in Huntington, IN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Engineered Plastic Components INC | 4.6 TCR |
| NAICS-TCR | Built-Rite | 4.7 TCR |
| NAICS-TCR | Service Tool & Die, Inc. | 4.7 TCR |
| NAICS-TCR | United Tool & Mold, Inc. | 4.6 TCR |
| STATE-SIZE | CenterPoint Energy - FB Culley | 75 FTE |
| STATE-SIZE | Graber Crews | 75 FTE |
| STATE-SIZE | Precision Wall Systems, Inc. | 75 FTE |
| STATE-SIZE | Main Office | 75 FTE |
| CITY-NEAR | Teijin Automotive Technologies, INC | 620 FTE |
| CITY-NEAR | Bendix Commercial Vehicle Systems | 528 FTE |
| CITY-NEAR | United Technologies Electronic Controls, Inc. | 461 FTE |
| CITY-NEAR | Bendix Commercial Vehicle Systems LLC -Huntington | 410 FTE |
| NAT-TCR | MiniFibers, Inc. | 4.7 TCR |
| NAT-TCR | 9215-PNS | 4.7 TCR |
| NAT-TCR | Brookdale Brookfield Capitol Drive | 4.7 TCR |
| NAT-TCR | Polymer Alliance Services LLC | 4.7 TCR |
| NAT-SIZE | Temple City Healthcare | 75 FTE |
| NAT-SIZE | Tezak Heavy Equipment | 75 FTE |
| NAT-SIZE | Bergey's Truck Centers Pennsauken | 75 FTE |
| NAT-SIZE | Priority Tyson's Nissan Mazda | 75 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.