Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing · Wisconsin
General Stamping & Metalworks- Tomah
Tomah, WI · ~71 workers · 3 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 9.8
- Avg TCR
- 3.3
- Industry avg
- 1
- Fatality
The verdict
General Stamping & Metalworks- Tomah runs at 297% of its industry's injury rate - far more dangerous than the typical Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing workplace, earning a grade F.
General Stamping & Metalworks- Tomah: 9.8 TCR = 297% of Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
General Stamping & Metalworks- Tomah safety composite
General Stamping & Metalworks- Tomah scores strongest on dart rate (safer than 16% of same-industry peers) and weakest on fatalities (safer than 1%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
11/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 9.79 per 100 workers
Safer than 12% of industry peers
- DART rate
- F 4.79 per 100 workers
Safer than 16% of industry peers
- Fatalities
- F 1
Safer than 1% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−9.1
2021→2023
General Stamping & Metalworks- Tomah injury rate improved
General Stamping & Metalworks- Tomah's TCR fell 9.1 from 13.9 in 2021 to 4.8 in 2023. Peak filing year was 2021 at 13.9 TCR. In 2023, DART was 0.49× this establishment's average TCR (severity share of cases).
2021=13.9 · 2022=10.7 · 2023=4.8
OSHA ITA Form 300A scorecard
Establishment book 332313 · Tomah, WI ABOVE-IND · SMALL
Grade F · TCR 9.8 · 297% of ind
- DART 4.8 DART
- RANK #40/45
- PHOTO Tuckey Metal Fabrica…
- BOOK 3y book
- INJ 21 inj
- SIZE ~71 FTE
Nearest TCR peer: Tuckey Metal Fabricators, Inc. (0.0 TCR gap)
Read with this employer → · Industry book → · Wisconsin employers → · Look up another →
General Stamping & Metalworks- Tomah in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Northpost Inc
Northpost Inc
9.9 TCR
- This site
General Stamping & Metalworks- Tomah
9.8 TCR
- Tuckey Metal F
Tuckey Metal Fabricators, Inc.
9.8 TCR
- McKenna Metal,
McKenna Metal, LLC
9.8 TCR
- Solid Steel Ma
Solid Steel Manufacturing LLC
9.7 TCR
What this shows General Stamping & Metalworks- Tomah averages 9.8 TCR (297% of the Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS benchmark).
General Stamping & Metalworks- Tomah TCR series: 2021=13.9 · 2022=10.7 · 2023=4.8 · BLS 3.3
Where General Stamping & Metalworks- Tomah falls in its industry
449 Plate work (e.g., bending, cut establishmentsSafer than 12% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Wisconsin alone (the establishments it most directly competes with for workers and contracts): ranked #40 safest of 45 Plate work (e.g., bending, cut employers in Wisconsin.
General Stamping & Metalworks- Tomah has more employees than the Plate work (e.g., bending, cutting, punc median and a higher injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 4.8 | 4.8 | 3 | 0 | 0 |
| 2022 | 10.7 | 7.6 | 7 | 0 | 0 |
| 2021 | 13.9 | 12.6 | 11 | 0 | 1 |
OSHA ITA peer cross-reference
Establishment peer ledger
332313 · WI · Tomah
449 Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing employers nationwide with a credible TCR · 12,834 rated employers in Wisconsin with headcount on file · 61 employers in Tomah, WI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Tuckey Metal Fabricators, Inc. | 9.8 TCR |
| NAICS-TCR | Solid Steel Manufacturing LLC | 9.7 TCR |
| NAICS-TCR | McKenna Metal, LLC | 9.8 TCR |
| NAICS-TCR | Northpost Inc | 9.9 TCR |
| STATE-SIZE | Renk Seed Company | 71 FTE |
| STATE-SIZE | Integrated Process Engineers & Constructors, Inc. | 71 FTE |
| STATE-SIZE | The Samuels Group, Inc. | 71 FTE |
| STATE-SIZE | Rural Masonry Co Inc | 71 FTE |
| CITY-NEAR | WM 6085 | 819 FTE |
| CITY-NEAR | 6085 | 791 FTE |
| CITY-NEAR | The Toro Company - Tomah Manufacturing Plant | 772 FTE |
| CITY-NEAR | Tomah IG | 513 FTE |
| NAT-TCR | Las Vegas Gallery | 9.8 TCR |
| NAT-TCR | Woodbury Villa | 9.8 TCR |
| NAT-TCR | Agriculture | 9.8 TCR |
| NAT-TCR | Southeastern Rail Services of Mulberry, FL, LLC | 9.8 TCR |
| NAT-SIZE | BrandSafway Services, LLC - Las Vegas - Branch | 71 FTE |
| NAT-SIZE | Compassus - N Detroit Warren | 71 FTE |
| NAT-SIZE | 15 Burke Ln EICU | 71 FTE |
| NAT-SIZE | Bowden Manufacturing Company | 71 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.