Extruded, molded or lathe-cut rubber goods manufacturing · Connecticut
Greene Rubber Co. (CT Molding Division)
Danielson, CT · ~57 workers · 5 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Greene Rubber Co. (CT Molding Division) runs at 92% of its industry's injury rate - about level with the typical Extruded, molded or lathe-cut rubber goods manufacturing workplace, earning a grade C.
Greene Rubber Co. (CT Molding Division): 3.0 TCR = 92% of Extruded, molded or lathe-cut rubber goods manufacturing BLS 3.3 · 5y Form 300A (see methodology below)
Greene Rubber Co. (CT Molding Division) safety composite
Greene Rubber Co. (CT Molding Division) scores strongest on dart rate (safer than 85% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
66/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 3.02 per 100 workers
Safer than 59% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 85% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Greene Rubber Co. (CT Molding Division): 2.0 → 5.7 TCR
Peak year 2019 @ 5.9 TCR · DART/TCR 0× in 2021
Greene Rubber Co. (CT Molding Division)'s TCR rose 3.7 from 2.0 in 2017 to 5.7 in 2021. Peak filing year was 2019 at 5.9 TCR. In 2021, DART was 0× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 326291 · Danielson, CT AT/BELOW-IND · SMALL
Grade C · TCR 3.0 · 92% of ind
- DART 0.0 DART
- RANK P59
- PHOTO Saint-Gobain Perform…
- BOOK 5y book
- INJ 10 inj
- SIZE ~57 FTE
Nearest TCR peer: Saint-Gobain Performance Plastics (0.0 TCR gap)
Read with this employer → · Industry book → · Connecticut employers → · Look up another →
Greene Rubber Co. (CT Molding Division) in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- GRC AZ
GRC AZ
3.1 TCR
- Finzer Roller
Finzer Roller - North Carolina
3.1 TCR
- This site
Greene Rubber Co. (CT Molding Division)
3 TCR
- Saint-Gobain P
Saint-Gobain Performance Plastics
3 TCR
- Freudenberg-NO
Freudenberg-NOK LaGrange
3 TCR
What this shows Greene Rubber Co. (CT Molding Division) averages 3.0 TCR (92% of the Extruded, molded or lathe-cut rubber goods manufacturing BLS benchmark).
Greene Rubber Co. (CT Molding Division) TCR series: 2017=2 · 2018=0 · 2019=5.9 · 2020=1.5 · 2021=5.7 · BLS 3.3
Where Greene Rubber Co. (CT Molding Division) falls in its industry
266 Extruded, molded or lathe-cut establishmentsSafer than 59% of graded establishments in this industry, whose median TCR is 3.6.
Greene Rubber Co. (CT Molding Division) has fewer employees than the Extruded, molded or lathe-cut rubber goo median and a lower injury rate than the industry's median TCR of 3.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 5.7 | 0.0 | 4 | 0 | 0 |
| 2020 | 1.5 | 1.5 | 1 | 0 | 0 |
| 2019 | 5.9 | 1.5 | 4 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 2.0 | 2.0 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
326291 · CT · Danielson
266 Extruded, molded or lathe-cut rubber goods manufacturing employers nationwide with a credible TCR · 7,008 rated employers in Connecticut with headcount on file · 18 employers in Danielson, CT · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Saint-Gobain Performance Plastics | 3.0 TCR |
| NAICS-TCR | GRC AZ | 3.1 TCR |
| NAICS-TCR | Freudenberg-NOK LaGrange | 3.0 TCR |
| NAICS-TCR | Finzer Roller - North Carolina | 3.1 TCR |
| STATE-SIZE | Rogers Orchards | 57 FTE |
| STATE-SIZE | Fusco Corporation | 57 FTE |
| STATE-SIZE | Main Office, Shop, Yard & Jobsites | 57 FTE |
| STATE-SIZE | Summit Masonry and Building Restoration | 57 FTE |
| CITY-NEAR | The Supported Living Group | 237 FTE |
| CITY-NEAR | JACC Healthcare of Danielson dba Davis Place | 233 FTE |
| CITY-NEAR | SPIROL International Corporation | 197 FTE |
| CITY-NEAR | The Arc Quinebaug Valley | 154 FTE |
| NAT-TCR | Beckerle Lumber Supply Co. Inc.- Spring Valley | 3.0 TCR |
| NAT-TCR | DENVER, CO (Container) | 3.0 TCR |
| NAT-TCR | Siemens Mobility, Inc. | 3.0 TCR |
| NAT-TCR | Plasan Carbon Composites Walker | 3.0 TCR |
| NAT-SIZE | National Door and Trim | 57 FTE |
| NAT-SIZE | North Hills Health and Rehabilitation Center | 57 FTE |
| NAT-SIZE | Embraer Executive Jet Services LLC IWA | 57 FTE |
| NAT-SIZE | Division #14 | 57 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.