Balancing equipment, motor vehicle, manufacturing · Tennessee
Hennessy Industries
La Vergne, TN · ~252 workers · 2 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Hennessy Industries runs at 31% of its industry's injury rate - far safer than the typical Balancing equipment, motor vehicle, manufacturing workplace, earning a grade A.
- A
- Excellent Safety Record
- 1.0
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 5
- recordable injuries tracked
Grade compares Hennessy Industries's OSHA Total Case Rate of 1.0 to the Balancing equipment, motor vehicle, manufacturing BLS benchmark of 3.3 (31% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Hennessy Industries's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Hennessy Industries falls in its industry
422 Balancing equipment, motor veh establishmentsSafer than 69% of graded establishments in this industry, whose median TCR is 2.1.
Narrower to Tennessee alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 8 Balancing equipment, motor veh employers in Tennessee.
Trend analysis for Hennessy Industries
Between 2021 and 2022, Hennessy Industries's Total Case Rate worsened from 0.8 to 1.3 recordable injuries per 100 full-time workers, a 68% increase across 1 year of OSHA reporting.
The safest year on record was 2021, at a TCR of 0.8, while 2022 saw the highest rate, at 1.3, a spread of 0.5 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, Hennessy Industries recorded 5 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 5 injuries shown on this page for Hennessy Industries are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333318 - Balancing equipment, motor vehicle, manufacturing.
DART Rate, Transparent Calculation (2022)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 470,588 hours worked = 0.85 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Hennessy Industries (this establishment) | 1.02 | OSHA ITA Form 300A, 2-year avg |
| Wash water recycling machinery manufacturing industry avg | 3.30 | BLS IIF, NAICS 333318 |
| Tennessee state avg (all industries) | 4.09 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Hennessy Industries to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2022: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2022 | 1.3 | 0.8 | 3 | 0 | 0 |
| 2021 | 0.8 | 0.8 | 2 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Hennessy Industries's reported OSHA injury record, strong versus its Balancing equipment, motor vehicle, manufacturing peers, but not a guarantee about any single site today.
- At 31% of the Balancing equipment, motor vehicle, manufacturing benchmark, Hennessy Industries reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Balancing equipment, motor vehicle, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Hennessy Industries's safety grade?
How many injuries has Hennessy Industries reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Tennessee, and by nearby establishments in La Vergne - a different peer set than the category browse links below.
Similar TCR (~1.0)
Similar size (~252 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.