Sheet metal work (except stampings) manufacturing · Virginia
Innovated Machhine & Tool Co., Inc.
Newport News, VA · ~47 workers · 4 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Innovated Machhine & Tool Co., Inc. runs at 134% of its industry's injury rate - more dangerous than the typical Sheet metal work (except stampings) manufacturing workplace, earning a grade D.
Innovated Machhine & Tool Co., Inc.: 4.4 TCR = 134% of Sheet metal work (except stampings) manufacturing BLS 3.3 · 4y Form 300A (see methodology below)
Innovated Machhine & Tool Co., Inc. safety composite
Innovated Machhine & Tool Co., Inc. scores strongest on total case rate (tcr) (safer than 51% of same-industry peers) and weakest on dart rate (safer than 13%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
38/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.41 per 100 workers
Safer than 51% of industry peers
- DART rate
- F 6.45 per 100 workers
Safer than 13% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Innovated Machhine & Tool Co., Inc.: 4.8 → 10.8 TCR
Peak year 2024 @ 10.8 TCR · DART/TCR 1.46× in 2024
Innovated Machhine & Tool Co., Inc.'s TCR rose 5.9 from 4.8 in 2018 to 10.8 in 2024. In 2024, DART was 1.46× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332322 · Newport News, VA ABOVE-IND · SMALL
Grade D · TCR 4.4 · 134% of ind
- DART 6.5 DART
- RANK #6/11
- PHOTO General Devices
- BOOK 4y book
- INJ 8 inj
- SIZE ~47 FTE
Nearest TCR peer: General Devices (0.0 TCR gap)
Read with this employer → · Industry book → · Virginia employers → · Look up another →
Innovated Machhine & Tool Co., Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Innovated Machhine & Tool Co., Inc.
4.4 TCR
- General Device
General Devices
4.4 TCR
- Armstrong & Ac
Armstrong & Aceves Roofing, Inc.
4.4 TCR
- Salina Vortex
Salina Vortex Corporation - Spectrum Metalcraft 304
4.4 TCR
- Ware Industrie
Ware Industries d.b.a. Marino \ WARE
4.4 TCR
What this shows Innovated Machhine & Tool Co., Inc. averages 4.4 TCR (134% of the Sheet metal work (except stampings) manufacturing BLS benchmark).
Innovated Machhine & Tool Co., Inc. TCR series: 2018=4.8 · 2020=0 · 2021=2.1 · 2024=10.8 · BLS 3.3
Where Innovated Machhine & Tool Co., Inc. falls in its industry
1,158 Sheet metal work (except stamp establishmentsSafer than 51% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Virginia alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 11 Sheet metal work (except stamp employers in Virginia.
Innovated Machhine & Tool Co., Inc. has fewer employees than the Sheet metal work (except stampings) manu median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 10.8 | 6.5 | 4 | 1 | 0 |
| 2021 | 2.1 | 2.1 | 1 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 4.8 | 4.8 | 3 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332322 · VA · Newport News
1,158 Sheet metal work (except stampings) manufacturing employers nationwide with a credible TCR · 12,673 rated employers in Virginia with headcount on file · 330 employers in Newport News, VA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | General Devices | 4.4 TCR |
| NAICS-TCR | Armstrong & Aceves Roofing, Inc. | 4.4 TCR |
| NAICS-TCR | Salina Vortex Corporation - Spectrum Metalcraft 304 | 4.4 TCR |
| NAICS-TCR | Ware Industries d.b.a. Marino \ WARE | 4.4 TCR |
| STATE-SIZE | BATH CO PW ST | 47 FTE |
| STATE-SIZE | RCL | 47 FTE |
| STATE-SIZE | Heritage Contracting LLC | 47 FTE |
| STATE-SIZE | TRINITY Group Construction | 47 FTE |
| CITY-NEAR | Newport News Shipbuilding - Division of Huntington Ingalls Industries | 24,543 FTE |
| CITY-NEAR | Riverside Regional Medical Center | 2,563 FTE |
| CITY-NEAR | Riverside Regional Medical Center-113 | 1,680 FTE |
| CITY-NEAR | 12490 Jefferson Ave | 1,503 FTE |
| NAT-TCR | Litchfield Community Unit School District #12 | 4.4 TCR |
| NAT-TCR | Armstrong & Aceves Roofing, Inc. | 4.4 TCR |
| NAT-TCR | Gate Precast Company - Structural | 4.4 TCR |
| NAT-TCR | San Jose Healthcare and Wellness Center | 4.4 TCR |
| NAT-SIZE | Finkl Steel Composite | 47 FTE |
| NAT-SIZE | National Custom Hollow Metal | 47 FTE |
| NAT-SIZE | Spitz, Inc. | 47 FTE |
| NAT-SIZE | Ashland Feed & Seed Co. | 47 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.