Machine shops · Minnesota
International Precision Machining, Inc.
Waite Park, MN · ~44 workers · 4 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 6.2
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
International Precision Machining, Inc. runs at 187% of its industry's injury rate - more dangerous than the typical Machine shops workplace, earning a grade D.
International Precision Machining, Inc.: 6.2 TCR = 187% of Machine shops BLS 3.3 · 4y Form 300A (see methodology below)
International Precision Machining, Inc. safety composite
International Precision Machining, Inc. scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on total case rate (tcr) (safer than 23%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
33/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 6.17 per 100 workers
Safer than 23% of industry peers
- DART rate
- F 2.19 per 100 workers
Safer than 32% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
International Precision Machining, Inc.: 2.8 → 13.1 TCR
Peak year 2023 @ 13.1 TCR · DART/TCR 0.35× in 2023
International Precision Machining, Inc.'s TCR rose 10.4 from 2.8 in 2020 to 13.1 in 2023. In 2023, DART was 0.35× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332710 · Waite Park, MN ABOVE-IND · SMALL
Grade D · TCR 6.2 · 187% of ind
- DART 2.2 DART
- RANK #64/92
- PHOTO Magic Circle
- BOOK 4y book
- INJ 10 inj
- SIZE ~44 FTE
Nearest TCR peer: Magic Circle (0.0 TCR gap)
Read with this employer → · Industry book → · Minnesota employers → · Look up another →
International Precision Machining, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
International Precision Machining, Inc.
6.2 TCR
- Magic Circle
Magic Circle
6.2 TCR
- Midwest Screw
Midwest Screw Products, Inc.
6.2 TCR
- Dynamic Tool C
Dynamic Tool Co., Inc
6.2 TCR
- Republic Diese
Republic Diesel, Inc
6.2 TCR
What this shows International Precision Machining, Inc. averages 6.2 TCR (187% of the Machine shops BLS benchmark).
International Precision Machining, Inc. TCR series: 2020=2.8 · 2021=2.4 · 2022=6.4 · 2023=13.1 · BLS 3.3
Where International Precision Machining, Inc. falls in its industry
1,821 Machine shops establishmentsSafer than 23% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to Minnesota alone (the establishments it most directly competes with for workers and contracts): ranked #64 safest of 92 Machine shops employers in Minnesota.
International Precision Machining, Inc. has fewer employees than the Machine shops median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 13.1 | 2.2 | 5 | 1 | 0 |
| 2022 | 6.4 | 2.1 | 3 | 0 | 0 |
| 2021 | 2.4 | 0.0 | 1 | 0 | 0 |
| 2020 | 2.8 | 0.0 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332710 · MN · Waite Park
1,821 Machine shops employers nationwide with a credible TCR · 15,828 rated employers in Minnesota with headcount on file · 82 employers in Waite Park, MN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Magic Circle | 6.2 TCR |
| NAICS-TCR | Midwest Screw Products, Inc. | 6.2 TCR |
| NAICS-TCR | Dynamic Tool Co., Inc | 6.2 TCR |
| NAICS-TCR | Republic Diesel, Inc | 6.2 TCR |
| STATE-SIZE | West River | 44 FTE |
| STATE-SIZE | Monticello Training Ctr-LL | 44 FTE |
| STATE-SIZE | Water Treatment Facility | 44 FTE |
| STATE-SIZE | WasteWater Treatment Facility | 44 FTE |
| CITY-NEAR | WACOSA | 570 FTE |
| CITY-NEAR | Bernicks Pepsi & Chas A Bernick of St Cloud | 323 FTE |
| CITY-NEAR | Buttweiler Environmental, Inc. | 260 FTE |
| CITY-NEAR | Buttweiler Environmental, Inc. Corporate Office | 247 FTE |
| NAT-TCR | 57233 Plattsburgh | 6.2 TCR |
| NAT-TCR | 2052 Sioux Falls Dc and Nf Distributors (Sd) | 6.2 TCR |
| NAT-TCR | Lloyd Pest Control-SA | 6.2 TCR |
| NAT-TCR | HEADQUARTERS | 6.2 TCR |
| NAT-SIZE | Dunlap Specialty Care | 44 FTE |
| NAT-SIZE | 091-Las Vegas/7th St | 44 FTE |
| NAT-SIZE | M.L. Albright & Sons, Inc | 44 FTE |
| NAT-SIZE | Miyako Hotel Los Angeles | 44 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.