Concrete finishing · California

J&M Concrete Contractors / dba Jezowski & Markel Contractors

Orange, CA · ~97 workers · 7 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.3
Avg TCR
2.8
Industry avg
0
Fatalities

The verdict

J&M Concrete Contractors / dba Jezowski & Markel Contractors runs at 118% of its industry's injury rate - about level with the typical Concrete finishing workplace, earning a grade C.

C
Average Safety Record
3.3
avg TCR · per 100 workers
2.8
industry benchmark (BLS)
18
recordable injuries tracked

Grade compares J&M Concrete Contractors / dba Jezowski & Markel Contractors's OSHA Total Case Rate of 3.3 to the Concrete finishing BLS benchmark of 2.8 (118% of benchmark) across 7 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

J&M Concrete Contractors / dba Jezowski & Markel Contractors's yearly Total Case Rate, against the 2.8 industry benchmark.

-202468 2017201820192020202220232024 1.22.8 Industry benchmarkJ&M Concrete Contractors / dba Jezowski & Markel Contractors TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 238110.

Where J&M Concrete Contractors / dba Jezowski & Markel Contractors falls in its industry

1,477 Concrete finishing establishments

Safer than 49% of graded establishments in this industry, whose median TCR is 3.2.

More dangerous than peersSafer than peers

Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #82 safest of 186 Concrete finishing employers in California.

Trend analysis for J&M Concrete Contractors / dba Jezowski & Markel Contractors

Between 2017 and 2024, J&M Concrete Contractors / dba Jezowski & Markel Contractors's Total Case Rate held roughly steady from 0.0 to 1.2 recordable injuries per 100 full-time workers, a 0% change across 7 years of OSHA reporting.

The safest year on record was 2017, at a TCR of 0.0, while 2022 saw the highest rate, at 7.0, a spread of 7.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 7 reporting years, J&M Concrete Contractors / dba Jezowski & Markel Contractors recorded 18 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 18 injuries shown on this page for J&M Concrete Contractors / dba Jezowski & Markel Contractors are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238110 - Concrete finishing.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

1 DART incidents × 200,000 ÷ 168,001 hours worked = 1.19 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
J&M Concrete Contractors / dba Jezowski & Markel Contractors (this establishment) 3.31 OSHA ITA Form 300A, 7-year avg
Foundation, building, poured concrete, contractors industry avg 2.80 BLS IIF, NAICS 238110
California state avg (all industries) 5.64 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by J&M Concrete Contractors / dba Jezowski & Markel Contractors to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 1.2 1.2 1 0 0
2023 1.4 0.0 1 0 0
2022 7.0 7.0 5 0 0
2020 3.9 3.9 6 0 0
2019 6.8 6.8 4 0 0
2018 2.8 0.0 1 0 0
2017 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on J&M Concrete Contractors / dba Jezowski & Markel Contractors's reported OSHA injury record versus its Concrete finishing peers, not a verdict on whether any single site is safe today.

  • At 118% of the Concrete finishing benchmark, J&M Concrete Contractors / dba Jezowski & Markel Contractors reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Concrete finishing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is J&M Concrete Contractors / dba Jezowski & Markel Contractors's safety grade?
J&M Concrete Contractors / dba Jezowski & Markel Contractors has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 3.3 compared to the BLS industry benchmark of 2.8 for Concrete finishing.
How many injuries has J&M Concrete Contractors / dba Jezowski & Markel Contractors reported?
J&M Concrete Contractors / dba Jezowski & Markel Contractors has reported 18 total injuries and 0 fatalities across 7 years of OSHA data (2024, 2023, 2022, 2020, 2019, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within California, and by nearby establishments in Orange - a different peer set than the category browse links below.

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.