Automatic screw machines, metal cutting type, manufacturing · Illinois
KKSP Precision Machining Glendale Heights
Glendale Heights, IL · ~82 workers · 3 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 8.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
KKSP Precision Machining Glendale Heights runs at 242% of its industry's injury rate - far more dangerous than the typical Automatic screw machines, metal cutting type, manufacturing workplace, earning a grade F.
- F
- Failing Safety Record
- 8.0
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 18
- recordable injuries tracked
Grade compares KKSP Precision Machining Glendale Heights's OSHA Total Case Rate of 8.0 to the Automatic screw machines, metal cutting type, manufacturing BLS benchmark of 3.3 (242% of benchmark) across 3 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
KKSP Precision Machining Glendale Heights's yearly Total Case Rate, against the 3.3 industry benchmark.
Where KKSP Precision Machining Glendale Heights falls in its industry
429 Automatic screw machines, meta establishmentsSafer than 12% of graded establishments in this industry, whose median TCR is 3.1.
Narrower to Illinois alone (the establishments it most directly competes with for workers and contracts): ranked #34 safest of 39 Automatic screw machines, meta employers in Illinois.
Trend analysis for KKSP Precision Machining Glendale Heights
Between 2016 and 2020, KKSP Precision Machining Glendale Heights's Total Case Rate improved from 11.8 to 3.7 recordable injuries per 100 full-time workers, a 69% decrease across 4 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 3.7, while 2016 saw the highest rate, at 11.8, a spread of 8.2 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, KKSP Precision Machining Glendale Heights recorded 18 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 18 injuries shown on this page for KKSP Precision Machining Glendale Heights are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333517 - Automatic screw machines, metal cutting type, manufacturing.
DART Rate, Transparent Calculation (2020)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 164,140 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| KKSP Precision Machining Glendale Heights (this establishment) | 8.00 | OSHA ITA Form 300A, 3-year avg |
| Sheet metal forming machines manufacturing industry avg | 3.30 | BLS IIF, NAICS 333517 |
| Illinois state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by KKSP Precision Machining Glendale Heights to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 11 reportable incidents · 11 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 3.7 | 0.0 | 3 | 0 | 0 |
| 2019 | 8.5 | 0.0 | 4 | 0 | 0 |
| 2016 | 11.8 | 7.5 | 11 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on KKSP Precision Machining Glendale Heights's reported OSHA injury record versus its Automatic screw machines, metal cutting type, manufacturing peers, not a verdict on whether any single site is safe today.
- At 242% of the Automatic screw machines, metal cutting type, manufacturing benchmark, KKSP Precision Machining Glendale Heights reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Automatic screw machines, metal cutting type, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is KKSP Precision Machining Glendale Heights's safety grade?
How many injuries has KKSP Precision Machining Glendale Heights reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Illinois, and by nearby establishments in Glendale Heights - a different peer set than the category browse links below.
Similar TCR (~8.0)
Similar size (~82 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.