Bending and forming machines, metalworking, manufacturing · Michigan

Lomar Machine & Tool Co. Plant 6

Horton, MI · ~24 workers · 2 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.0
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Lomar Machine & Tool Co. Plant 6 runs at 60% of its industry's injury rate - safer than the typical Bending and forming machines, metalworking, manufacturing workplace, earning a grade B.

Lomar Machine & Tool Co. Plant 6: 2.0 TCR = 60% of Bending and forming machines, metalworking, manufacturing BLS 3.3 · 2y Form 300A (see methodology below)

Lomar Machine & Tool Co. Plant 6 safety composite

Lomar Machine & Tool Co. Plant 6 scores strongest on total case rate (tcr) (safer than 73% of same-industry peers) and weakest on dart rate (safer than 15%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

47/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 1.97 per 100 workers

Safer than 73% of industry peers

DART rate
F 3.94 per 100 workers

Safer than 15% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Lomar Machine & Tool Co. Plant 6: 0.0 → 3.9 TCR

Peak year 2024 @ 3.9 TCR · DART/TCR 2× in 2024

Lomar Machine & Tool Co. Plant 6's TCR rose 3.9 from 0.0 in 2023 to 3.9 in 2024. In 2024, DART was 2× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 333517 · Horton, MI AT/BELOW-IND · SMALL

Grade B · TCR 2.0 · 60% of ind

  • DART 3.9 DART
  • RANK #18/58
  • PHOTO Formtek Inc.
  • BOOK 2y book
  • INJ 1 inj
  • SIZE ~24 FTE

Nearest TCR peer: Formtek Inc. (0.0 TCR gap)

Read with this employer → · Industry book → · Michigan employers → · Look up another →

Lomar Machine & Tool Co. Plant 6 in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Lomar Machine & Tool Co. Plant 6 averages 2.0 TCR (60% of the Bending and forming machines, metalworking, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Lomar Machine & Tool Co. Plant 6 TCR series: 2023=0 · 2024=3.9 · BLS 3.3

Where Lomar Machine & Tool Co. Plant 6 falls in its industry

391 Bending and forming machines, establishments

Safer than 73% of graded establishments in this industry, whose median TCR is 3.4.

More dangerous than peersSafer than peers

Narrower to Michigan alone (the establishments it most directly competes with for workers and contracts): ranked #18 safest of 58 Bending and forming machines, employers in Michigan.

Lomar Machine & Tool Co. Plant 6 (24 employees, TCR 2.0) among 29 same-industry peers, split at the industry median of 55 employees and a TCR of 3.4 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300 051015 Average employees Total Case Rate Lomar Machine & Tool Co. Plant 6
Lomar Machine & Tool Co. Plant 6 (24 employees, TCR 2.0) among 29 same-industry peers, split at the industry median of 55 employees and a TCR of 3.4

Lomar Machine & Tool Co. Plant 6 has fewer employees than the Bending and forming machines, metalworki median and a lower injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 3.9 3.9 1 0 0
2023 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

333517 · MI · Horton

391 Bending and forming machines, metalworking, manufacturing employers nationwide with a credible TCR · 16,393 rated employers in Michigan with headcount on file · 4 employers in Horton, MI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Formtek Inc. 2.0 TCR
NAICS-TCR Orbitform 1.9 TCR
NAICS-TCR The Lincoln Electric Company - Reno 2.0 TCR
NAICS-TCR Weiss-Aug East Hanover 2.0 TCR
STATE-SIZE Medina Dairy, LLC 24 FTE
STATE-SIZE Sturgis 24 FTE
STATE-SIZE CE Innovation Center 24 FTE
STATE-SIZE Water Filtration and Meter Shop 24 FTE
CITY-NEAR Lomar Machine & Tool Co. 116 FTE
CITY-NEAR Lomar Machine & Tool Co. Plant 3 46 FTE
CITY-NEAR Lowe Construction, Inc 36 FTE
NAT-TCR Atlas Tube 2.0 TCR
NAT-TCR Total Comfort Solutions, Inc. 2.0 TCR
NAT-TCR Yamashoelkgrove 2.0 TCR
NAT-TCR Fred Haas Toyota World 2.0 TCR
NAT-SIZE Pooler 24 FTE
NAT-SIZE Denair HVAC INC 24 FTE
NAT-SIZE World Transload & Logistics LLC 24 FTE
NAT-SIZE Advanced Wiring Solutions 24 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.