Gasoline engines, aircraft, manufacturing · Pennsylvania
Lycoming Engines
Williamsport, PA · ~480 workers · 3 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Lycoming Engines runs at 45% of its industry's injury rate - far safer than the typical Gasoline engines, aircraft, manufacturing workplace, earning a grade A.
- A
- Excellent Safety Record
- 1.5
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 20
- recordable injuries tracked
Grade compares Lycoming Engines's OSHA Total Case Rate of 1.5 to the Gasoline engines, aircraft, manufacturing BLS benchmark of 3.3 (45% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Lycoming Engines's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Lycoming Engines falls in its industry
401 Gasoline engines, aircraft, ma establishmentsSafer than 51% of graded establishments in this industry, whose median TCR is 1.5.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #5 safest of 13 Gasoline engines, aircraft, ma employers in Pennsylvania.
Trend analysis for Lycoming Engines
Between 2020 and 2022, Lycoming Engines's Total Case Rate improved from 1.6 to 1.0 recordable injuries per 100 full-time workers, a 41% decrease across 2 years of OSHA reporting.
The safest year on record was 2022, at a TCR of 1.0, while 2021 saw the highest rate, at 1.9, a spread of 0.9 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, Lycoming Engines recorded 20 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 20 injuries, 2 illnesses shown on this page for Lycoming Engines are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 336412 - Gasoline engines, aircraft, manufacturing.
DART Rate, Transparent Calculation (2022)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
3 DART incidents × 200,000 ÷ 1,046,477 hours worked = 0.57 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Lycoming Engines (this establishment) | 1.48 | OSHA ITA Form 300A, 3-year avg |
| Aircraft engine and engine parts (except carburetors, pistons, piston rings, valves) manufacturing industry avg | 3.30 | BLS IIF, NAICS 336412 |
| Pennsylvania state avg (all industries) | 5.06 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Lycoming Engines to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2022: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 9 reportable incidents · 7 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 8 reportable incidents · 8 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2022 | 1.0 | 0.6 | 5 | 0 | 0 |
| 2021 | 1.9 | 0.4 | 7 | 2 | 0 |
| 2020 | 1.6 | 0.2 | 8 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Lycoming Engines's reported OSHA injury record, strong versus its Gasoline engines, aircraft, manufacturing peers, but not a guarantee about any single site today.
- At 45% of the Gasoline engines, aircraft, manufacturing benchmark, Lycoming Engines reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Gasoline engines, aircraft, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Lycoming Engines's safety grade?
How many injuries has Lycoming Engines reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Pennsylvania, and by nearby establishments in Williamsport - a different peer set than the category browse links below.
Similar TCR (~1.5)
Similar size (~480 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.