Structural steel, fabricated, manufacturing · Alabama
Marbury Steel Fabricators, Inc.
Marbury, AL · ~22 workers · 9 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 1.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Marbury Steel Fabricators, Inc. runs at 55% of its industry's injury rate - safer than the typical Structural steel, fabricated, manufacturing workplace, earning a grade B.
Marbury Steel Fabricators, Inc.: 1.8 TCR = 55% of Structural steel, fabricated, manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
Marbury Steel Fabricators, Inc. safety composite
Marbury Steel Fabricators, Inc. scores strongest on total case rate (tcr) (safer than 83% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
75/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- B 1.82 per 100 workers
Safer than 83% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 82% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Marbury Steel Fabricators, Inc. held a steady TCR band
Marbury Steel Fabricators, Inc.'s TCR held near 0.0 from 0.0 in 2016 to 0.0 in 2024. Peak filing year was 2023 at 7.7 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2016=0.0 · 2017=4.8 · 2018=0.0 · 2019=0.0 · 2020=0.0 · 2021=0.0 · 2022=3.9 · 2023=7.7 · 2024=0.0
OSHA ITA Form 300A scorecard
Establishment book 332312 · Marbury, AL AT/BELOW-IND · SMALL
Grade B · TCR 1.8 · 55% of ind
- DART 0.0 DART
- RANK #12/61
- PHOTO CMC Rebar Orlando
- BOOK 9y book
- INJ 4 inj
- SIZE ~22 FTE
Nearest TCR peer: CMC Rebar Orlando (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Marbury Steel Fabricators, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Marbury Steel Fabricators, Inc.
1.8 TCR
- CMC Rebar Orla
CMC Rebar Orlando
1.8 TCR
- W&W-AFCO Steel
W&W-AFCO Steel - Oklahoma City
1.8 TCR
- Williams Form
Williams Form Engineering Oregon
1.8 TCR
- CMC Rebar Farm
CMC Rebar Farmersville
1.8 TCR
What this shows Marbury Steel Fabricators, Inc. averages 1.8 TCR (55% of the Structural steel, fabricated, manufacturing BLS benchmark).
Marbury Steel Fabricators, Inc. TCR series: 2016=0 · 2017=4.8 · 2018=0 · 2019=0 · 2020=0 · 2021=0 · 2022=3.9 · 2023=7.7 · 2024=0 · BLS 3.3
Where Marbury Steel Fabricators, Inc. falls in its industry
1,491 Structural steel, fabricated, establishmentsSafer than 83% of graded establishments in this industry, whose median TCR is 4.6.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #12 safest of 61 Structural steel, fabricated, employers in Alabama.
Marbury Steel Fabricators, Inc. has fewer employees than the Structural steel, fabricated, manufactur median and a lower injury rate than the industry's median TCR of 4.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 7.7 | 7.7 | 2 | 0 | 0 |
| 2022 | 3.9 | 3.9 | 1 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 4.8 | 4.8 | 1 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332312 · AL · Marbury
1,491 Structural steel, fabricated, manufacturing employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | CMC Rebar Orlando | 1.8 TCR |
| NAICS-TCR | W&W-AFCO Steel - Oklahoma City | 1.8 TCR |
| NAICS-TCR | Williams Form Engineering Oregon | 1.8 TCR |
| NAICS-TCR | CMC Rebar Farmersville | 1.8 TCR |
| STATE-SIZE | Koch Foods Breeder/Broiler | 22 FTE |
| STATE-SIZE | Koch Foods Live Haul Gadsden Alabama | 22 FTE |
| STATE-SIZE | M.A.D.H. GIN, INC. | 22 FTE |
| STATE-SIZE | Logan Martin Dam | 22 FTE |
| NAT-TCR | Deco Bike LLC | 1.8 TCR |
| NAT-TCR | Giant Eagle #4095 | 1.8 TCR |
| NAT-TCR | Panhandle Grading & Paving, Inc. | 1.8 TCR |
| NAT-TCR | Alpha Paving Industries LLC | 1.8 TCR |
| NAT-SIZE | Aurora Cooperative - Service Center | 22 FTE |
| NAT-SIZE | Salt Lake City Distribution | 22 FTE |
| NAT-SIZE | Pittsburg Distribution | 22 FTE |
| NAT-SIZE | Ft. Wayne ARC | 22 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.