Steel Wire Drawing · Texas

Master-Halco, Inc. - Dallas MFG 031

Dallas, TX · ~53 workers · 2 years of OSHA Injury Tracking Application data.

B
Good Safety Record
1.8
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Master-Halco, Inc. - Dallas MFG 031 runs at 55% of its industry's injury rate - safer than the typical Steel Wire Drawing workplace, earning a grade B.

Master-Halco, Inc. - Dallas MFG 031: 1.8 TCR = 55% of Steel Wire Drawing BLS 3.3 · 2y Form 300A (see methodology below)

Master-Halco, Inc. - Dallas MFG 031 safety composite

Master-Halco, Inc. - Dallas MFG 031 scores strongest on total case rate (tcr) (safer than 83% of same-industry peers) and weakest on dart rate (safer than 36%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

58/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
B 1.83 per 100 workers

Safer than 83% of industry peers

DART rate
D 3.66 per 100 workers

Safer than 36% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Master-Halco, Inc. - Dallas MFG 031: 0.0 → 3.7 TCR

Peak year 2024 @ 3.7 TCR · DART/TCR 2× in 2024

Master-Halco, Inc. - Dallas MFG 031's TCR rose 3.7 from 0.0 in 2021 to 3.7 in 2024. In 2024, DART was 2× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 331222 · Dallas, TX AT/BELOW-IND · SMALL

Grade B · TCR 1.8 · 55% of ind

  • DART 3.7 DART
  • RANK #3/12
  • PHOTO Insteel Wire Product…
  • BOOK 2y book
  • INJ 2 inj
  • SIZE ~53 FTE

Nearest TCR peer: Insteel Wire Products AZW (0.0 TCR gap)

Read with this employer → · Industry book → · Texas employers → · Look up another →

Master-Halco, Inc. - Dallas MFG 031 in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Master-Halco, Inc. - Dallas MFG 031 averages 1.8 TCR (55% of the Steel Wire Drawing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Master-Halco, Inc. - Dallas MFG 031 TCR series: 2021=0 · 2024=3.7 · BLS 3.3

Where Master-Halco, Inc. - Dallas MFG 031 falls in its industry

163 Steel Wire Drawing establishments

Safer than 83% of graded establishments in this industry, whose median TCR is 4.8.

More dangerous than peersSafer than peers

Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 12 Steel Wire Drawing employers in Texas.

Master-Halco, Inc. - Dallas MFG 031 (53 employees, TCR 1.8) among 29 same-industry peers, split at the industry median of 70 employees and a TCR of 4.8 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400 05101520 Average employees Total Case Rate Master-Halco, Inc. - Dallas MFG 031
Master-Halco, Inc. - Dallas MFG 031 (53 employees, TCR 1.8) among 29 same-industry peers, split at the industry median of 70 employees and a TCR of 4.8

Master-Halco, Inc. - Dallas MFG 031 has fewer employees than the Steel Wire Drawing median and a lower injury rate than the industry's median TCR of 4.8. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 3.7 3.7 2 0 0
2021 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

331222 · TX · Dallas

163 Steel Wire Drawing employers nationwide with a credible TCR · 38,394 rated employers in Texas with headcount on file · 2,187 employers in Dallas, TX · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Insteel Wire Products AZW 1.9 TCR
NAICS-TCR Elgiloy Specialty Metals - Sycamore 1.8 TCR
NAICS-TCR Ardmore Bldg A 1.9 TCR
NAICS-TCR Solon Specialty Wire 1.7 TCR
STATE-SIZE XIT Feeders 53 FTE
STATE-SIZE Wolf Creek Feedyard 53 FTE
STATE-SIZE Western Cattle Feeders, LLC 53 FTE
STATE-SIZE Glasscock County Coop 53 FTE
CITY-NEAR AECOM DCS (US Operations) 15,100 FTE
CITY-NEAR Rexel USA, Inc 8,356 FTE
CITY-NEAR 1 CHILDRENS MEDICAL CENTER OF DALLAS 6,147 FTE
CITY-NEAR HDQ - Headquarters 5,764 FTE
NAT-TCR Fuda Elmwood Park 1.8 TCR
NAT-TCR Bristol Prime Contractors, LLC 1.8 TCR
NAT-TCR Barry 1.8 TCR
NAT-TCR Scherer 1.8 TCR
NAT-SIZE Portageville Health Care Center 53 FTE
NAT-SIZE Staten Island 53 FTE
NAT-SIZE PX1 53 FTE
NAT-SIZE QuantumClean - Phoenix West 53 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2021. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.