Manufacturing- Powder Metallurgy- Part Manufacturing · Massachusetts
Materion Newton Inc
Newton, MA · ~179 workers · 3 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Materion Newton Inc runs at 76% of its industry's injury rate - safer than the typical Manufacturing- Powder Metallurgy- Part Manufacturing workplace, earning a grade B.
- B
- Good Safety Record
- 2.5
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 13
- recordable injuries tracked
Grade compares Materion Newton Inc's OSHA Total Case Rate of 2.5 to the Manufacturing- Powder Metallurgy- Part Manufacturing BLS benchmark of 3.3 (76% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Materion Newton Inc's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Materion Newton Inc falls in its industry
118 Manufacturing- Powder Metallur establishmentsSafer than 58% of graded establishments in this industry, whose median TCR is 3.1.
Narrower to Massachusetts alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 6 Manufacturing- Powder Metallur employers in Massachusetts.
Trend analysis for Materion Newton Inc
Between 2022 and 2024, Materion Newton Inc's Total Case Rate worsened from 2.3 to 3.5 recordable injuries per 100 full-time workers, a 53% increase across 2 years of OSHA reporting.
The safest year on record was 2023, at a TCR of 1.8, while 2024 saw the highest rate, at 3.5, a spread of 1.7 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, Materion Newton Inc recorded 13 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 13 injuries shown on this page for Materion Newton Inc are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331491 - Manufacturing- Powder Metallurgy- Part Manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 341,780 hours worked = 2.34 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Materion Newton Inc (this establishment) | 2.52 | OSHA ITA Form 300A, 3-year avg |
| Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants industry avg | 3.30 | BLS IIF, NAICS 331491 |
| Massachusetts state avg (all industries) | 4.94 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Materion Newton Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.5 | 2.3 | 6 | 0 | 0 |
| 2023 | 1.8 | 1.2 | 3 | 0 | 0 |
| 2022 | 2.3 | 1.7 | 4 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Materion Newton Inc's reported OSHA injury record, strong versus its Manufacturing- Powder Metallurgy- Part Manufacturing peers, but not a guarantee about any single site today.
- At 76% of the Manufacturing- Powder Metallurgy- Part Manufacturing benchmark, Materion Newton Inc reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Manufacturing- Powder Metallurgy- Part Manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Materion Newton Inc's safety grade?
How many injuries has Materion Newton Inc reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Massachusetts, and by nearby establishments in Newton - a different peer set than the category browse links below.
Similar TCR (~2.5)
Similar size (~179 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.