Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants · New York
BPD
Utica, NY · ~348 workers · 9 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.6
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
BPD runs at 79% of its industry's injury rate - safer than the typical Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants workplace, earning a grade B.
BPD: 2.6 TCR = 79% of Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants BLS 3.3 · 9y Form 300A (see methodology below)
BPD safety composite
BPD scores strongest on total case rate (tcr) (safer than 59% of same-industry peers) and weakest on dart rate (safer than 39%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
50/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.62 per 100 workers
Safer than 59% of industry peers
- DART rate
- D 2.45 per 100 workers
Safer than 39% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
BPD: 2.8 → 3.5 TCR
Peak year 2022 @ 5.7 TCR · DART/TCR 0.94× in 2024
BPD's TCR rose 0.8 from 2.8 in 2016 to 3.5 in 2024. Peak filing year was 2022 at 5.7 TCR. In 2024, DART was 0.94× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 331491 · Utica, NY AT/BELOW-IND · MID
Grade B · TCR 2.6 · 79% of ind
- DART 2.5 DART
- RANK #5/9
- PHOTO Materion - Albuquerq…
- BOOK 9y book
- INJ 70 inj
- SIZE ~348 FTE
Nearest TCR peer: Materion - Albuquerque (North) (0.0 TCR gap)
Read with this employer → · Industry book → · New York employers → · Look up another →
BPD in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Materion - Alb
Materion - Albuquerque (North)
2.7 TCR
- Exide Technolo
Exide Technologies
2.7 TCR
- Befesa Zinc Me
Befesa Zinc Metal
2.7 TCR
- This site
BPD
2.6 TCR
- Materion Newto
Materion Newton Inc
2.5 TCR
What this shows BPD averages 2.6 TCR (79% of the Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants BLS benchmark).
BPD TCR series: 2016=2.8 · 2017=1 · 2018=1.9 · 2019=3 · 2020=1.3 · 2021=2.6 · 2022=5.7 · 2023=1.7 · 2024=3.5 · BLS 3.3
Where BPD falls in its industry
113 Bar, nonferrous metals (except establishmentsSafer than 59% of graded establishments in this industry, whose median TCR is 3.1.
Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #5 safest of 9 Bar, nonferrous metals (except employers in New York.
BPD has more employees than the Bar, nonferrous metals (except aluminum, median and a lower injury rate than the industry's median TCR of 3.1. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.5 | 2.5 | 12 | 1 | 0 |
| 2023 | 1.7 | 1.1 | 5 | 1 | 0 |
| 2022 | 5.7 | 3.7 | 16 | 7 | 0 |
| 2021 | 2.6 | 2.4 | 8 | 3 | 0 |
| 2020 | 1.3 | 0.8 | 3 | 2 | 0 |
| 2019 | 3.0 | 2.0 | 11 | 1 | 0 |
| 2018 | 1.9 | 1.1 | 6 | 1 | 0 |
| 2017 | 1.0 | 1.0 | 3 | 0 | 0 |
| 2016 | 2.8 | 1.8 | 6 | 2 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331491 · NY · Utica
113 Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants employers nationwide with a credible TCR · 21,008 rated employers in New York with headcount on file · 148 employers in Utica, NY · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Materion - Albuquerque (North) | 2.7 TCR |
| NAICS-TCR | Exide Technologies | 2.7 TCR |
| NAICS-TCR | Befesa Zinc Metal | 2.7 TCR |
| NAICS-TCR | Materion Newton Inc | 2.5 TCR |
| STATE-SIZE | Donaldson Interiors | 348 FTE |
| STATE-SIZE | Advanced Atomization Technologies | 348 FTE |
| STATE-SIZE | Unit # 2718 | 348 FTE |
| STATE-SIZE | 1993 | 348 FTE |
| CITY-NEAR | Resource Center for Independent Living | 3,351 FTE |
| CITY-NEAR | Faxton St. Lukes | 1,727 FTE |
| CITY-NEAR | St Elizabeth Medical Center | 1,324 FTE |
| CITY-NEAR | Utica University | 915 FTE |
| NAT-TCR | Advantage Tank Lines 20021 Detroit | 2.6 TCR |
| NAT-TCR | Pomona | 2.6 TCR |
| NAT-TCR | Pioneer Electric Cooperative | 2.6 TCR |
| NAT-TCR | Prospect Airport Services EWR | 2.6 TCR |
| NAT-SIZE | Aspen Surgical | 348 FTE |
| NAT-SIZE | T914 Corporate | 348 FTE |
| NAT-SIZE | Giant Eagle #6539 | 348 FTE |
| NAT-SIZE | Norplas Industries (Magna T.E.A.M. Systems) | 348 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.