Motor vehicle moldings and extrusions, plastics, manufacturing · Alabama
Mitchell Plastics Huntsville
Huntsville, AL · ~242 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Mitchell Plastics Huntsville runs at 135% of its industry's injury rate - more dangerous than the typical Motor vehicle moldings and extrusions, plastics, manufacturing workplace, earning a grade D.
Mitchell Plastics Huntsville: 4.5 TCR = 135% of Motor vehicle moldings and extrusions, plastics, manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
Mitchell Plastics Huntsville safety composite
Mitchell Plastics Huntsville scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on total case rate (tcr) (safer than 37%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
44/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.46 per 100 workers
Safer than 37% of industry peers
- DART rate
- D 1.85 per 100 workers
Safer than 47% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−7.3
2016→2024
Mitchell Plastics Huntsville injury rate improved
Mitchell Plastics Huntsville's TCR fell 7.3 from 10.1 in 2016 to 2.8 in 2024. Peak filing year was 2016 at 10.1 TCR. In 2024, DART was 0.41× this establishment's average TCR (severity share of cases).
2016=10.1 · 2017=7.1 · 2018=3.6 · 2019=3.2 · 2020=3.9 · 2021=1.8 · 2022=3.2 · 2023=4.6 · 2024=2.8
OSHA ITA Form 300A scorecard
Establishment book 326199 · Huntsville, AL ABOVE-IND · MID
Grade D · TCR 4.5 · 135% of ind
- DART 1.9 DART
- RANK #39/65
- PHOTO East Jordan Plastics…
- BOOK 9y book
- INJ 80 inj
- SIZE ~242 FTE
Nearest TCR peer: East Jordan Plastics East Jordan (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Mitchell Plastics Huntsville in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Mitchell Plastics Huntsville
4.5 TCR
- East Jordan Pl
East Jordan Plastics East Jordan
4.5 TCR
- Fibeco Corpora
Fibeco Corporation
4.5 TCR
- NOV Fiber Glas
NOV Fiber Glass Systems, LP
4.5 TCR
- Spartek, Inc
Spartek, Inc
4.5 TCR
What this shows Mitchell Plastics Huntsville averages 4.5 TCR (135% of the Motor vehicle moldings and extrusions, plastics, manufacturing BLS benchmark).
Mitchell Plastics Huntsville TCR series: 2016=10.1 · 2017=7.1 · 2018=3.6 · 2019=3.2 · 2020=3.9 · 2021=1.8 · 2022=3.2 · 2023=4.6 · 2024=2.8 · BLS 3.3
Where Mitchell Plastics Huntsville falls in its industry
2,838 Motor vehicle moldings and ext establishmentsSafer than 37% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #39 safest of 65 Motor vehicle moldings and ext employers in Alabama.
Mitchell Plastics Huntsville has more employees than the Motor vehicle moldings and extrusions, p median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 2.8 | 1.9 | 9 | 0 | 0 |
| 2023 | 4.6 | 2.8 | 13 | 2 | 0 |
| 2022 | 3.2 | 2.1 | 9 | 0 | 0 |
| 2021 | 1.8 | 1.8 | 5 | 0 | 0 |
| 2020 | 3.9 | 2.6 | 9 | 0 | 0 |
| 2019 | 3.2 | 0.8 | 8 | 0 | 0 |
| 2018 | 3.6 | 1.2 | 5 | 1 | 0 |
| 2017 | 7.1 | 2.1 | 10 | 0 | 0 |
| 2016 | 10.1 | 2.5 | 12 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
326199 · AL · Huntsville
2,838 Motor vehicle moldings and extrusions, plastics, manufacturing employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 454 employers in Huntsville, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | East Jordan Plastics East Jordan | 4.5 TCR |
| NAICS-TCR | Fibeco Corporation | 4.5 TCR |
| NAICS-TCR | NOV Fiber Glass Systems, LP | 4.5 TCR |
| NAICS-TCR | Spartek, Inc | 4.5 TCR |
| STATE-SIZE | 1773 - Trussville | 242 FTE |
| STATE-SIZE | 2748 | 242 FTE |
| STATE-SIZE | 0362 - HOOVER AL WHSE | 242 FTE |
| STATE-SIZE | Sunshine Mills Red Bay, AL | 243 FTE |
| CITY-NEAR | AL004 | 2,929 FTE |
| CITY-NEAR | Dynetics A Leidos Company | 2,463 FTE |
| CITY-NEAR | Leidos - Dynetics | 2,051 FTE |
| CITY-NEAR | Toyota Motor Mfg of Alabama | 1,874 FTE |
| NAT-TCR | Quad Cities Branch | 4.5 TCR |
| NAT-TCR | TTI- Rapid City, SD | 4.5 TCR |
| NAT-TCR | Prospect International Airport Services PDX | 4.5 TCR |
| NAT-TCR | Advantage Tank Lines 20330 - Decatur (Central IL) | 4.5 TCR |
| NAT-SIZE | Clark-Lindsey Village, Inc. | 242 FTE |
| NAT-SIZE | Zenith Logistics English | 242 FTE |
| NAT-SIZE | Hopkinsville | 242 FTE |
| NAT-SIZE | Kewaunee Fabrications | 242 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.