Metal stampings (except automotive, cans, coins), unfinished, manufacturing · North Carolina
MiTek, Inc. - Edenton Stamping
Edenton, NC · ~58 workers · 6 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 1.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
MiTek, Inc. - Edenton Stamping runs at 55% of its industry's injury rate - safer than the typical Metal stampings (except automotive, cans, coins), unfinished, manufacturing workplace, earning a grade B.
MiTek, Inc. - Edenton Stamping: 1.8 TCR = 55% of Metal stampings (except automotive, cans, coins), unfinished, manufacturing BLS 3.3 · 6y Form 300A (see methodology below)
MiTek, Inc. - Edenton Stamping safety composite
MiTek, Inc. - Edenton Stamping scores strongest on total case rate (tcr) (safer than 91% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
78/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- A 1.8 per 100 workers
Safer than 91% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 82% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
MiTek, Inc. - Edenton Stamping: 0.0 → 3.1 TCR
Peak year 2023 @ 4.3 TCR · DART/TCR 0× in 2024
MiTek, Inc. - Edenton Stamping's TCR rose 3.1 from 0.0 in 2019 to 3.1 in 2024. Peak filing year was 2023 at 4.3 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332119 · Edenton, NC AT/BELOW-IND · SMALL
Grade B · TCR 1.8 · 55% of ind
- DART 0.0 DART
- RANK #1/7
- PHOTO Crown Cork & Seal US…
- BOOK 6y book
- INJ 6 inj
- SIZE ~58 FTE
Nearest TCR peer: Crown Cork & Seal USA, Inc. - Weirton Plant (0.0 TCR gap)
Read with this employer → · Industry book → · North Carolina employers → · Look up another →
MiTek, Inc. - Edenton Stamping in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
MiTek, Inc. - Edenton Stamping
1.8 TCR
- Crown Cork & S
Crown Cork & Seal USA, Inc. - Weirton Plant
1.8 TCR
- Frontier Metal
Frontier Metal Stamping, Inc.
1.8 TCR
- Keats Manufact
Keats Manufacturing Company
1.8 TCR
- 083 LCI
083 LCI
1.8 TCR
What this shows MiTek, Inc. - Edenton Stamping averages 1.8 TCR (55% of the Metal stampings (except automotive, cans, coins), unfinished, manufacturing BLS benchmark).
MiTek, Inc. - Edenton Stamping TCR series: 2019=0 · 2020=1.9 · 2021=1.5 · 2022=0 · 2023=4.3 · 2024=3.1 · BLS 3.3
Where MiTek, Inc. - Edenton Stamping falls in its industry
477 Metal stampings (except automo establishmentsSafer than 91% of graded establishments in this industry, whose median TCR is 5.1.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 7 Metal stampings (except automo employers in North Carolina.
MiTek, Inc. - Edenton Stamping has fewer employees than the Metal stampings (except automotive, cans median and a lower injury rate than the industry's median TCR of 5.1. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.1 | 0.0 | 2 | 0 | 0 |
| 2023 | 4.3 | 4.3 | 3 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 1.5 | 1.5 | 1 | 0 | 0 |
| 2020 | 1.9 | 0.0 | 0 | 1 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332119 · NC · Edenton
477 Metal stampings (except automotive, cans, coins), unfinished, manufacturing employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 27 employers in Edenton, NC · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Crown Cork & Seal USA, Inc. - Weirton Plant | 1.8 TCR |
| NAICS-TCR | Frontier Metal Stamping, Inc. | 1.8 TCR |
| NAICS-TCR | Keats Manufacturing Company | 1.8 TCR |
| NAICS-TCR | 083 LCI | 1.8 TCR |
| STATE-SIZE | Wilmington North Operations Complex | 58 FTE |
| STATE-SIZE | Administration | 58 FTE |
| STATE-SIZE | TMI Services, Inc. | 58 FTE |
| STATE-SIZE | North State Environmental | 58 FTE |
| CITY-NEAR | ECU Health Chowan Hospital | 328 FTE |
| CITY-NEAR | Vidant Chowan Hospital | 326 FTE |
| CITY-NEAR | Jimbos Jumbos | 283 FTE |
| CITY-NEAR | Regulator Marine, Inc. | 212 FTE |
| NAT-TCR | Reynolds Excavation | 1.8 TCR |
| NAT-TCR | The Arc of Bergen & Passaic Counties | 1.8 TCR |
| NAT-TCR | Circle D Corporation Inc | 1.8 TCR |
| NAT-TCR | Triton Senior High School | 1.8 TCR |
| NAT-SIZE | 202LAF | 58 FTE |
| NAT-SIZE | 605FRM | 58 FTE |
| NAT-SIZE | Eureka Nursing | 58 FTE |
| NAT-SIZE | Tim Paxin's Pacific Excavation, Inc | 58 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.