Hardwood veneer or plywood manufacturing · Virginia
Mohawk UNILIN North American Flooring
Danville, VA · ~380 workers · 2 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 1.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Mohawk UNILIN North American Flooring runs at 59% of its industry's injury rate - safer than the typical Hardwood veneer or plywood manufacturing workplace, earning a grade B.
- B
- Good Safety Record
- 1.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 18
- recordable injuries tracked
Grade compares Mohawk UNILIN North American Flooring's OSHA Total Case Rate to the BLS industry benchmark across 2 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Mohawk UNILIN North American Flooring's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Mohawk UNILIN North American Flooring falls in its industry
123 Hardwood veneer or plywood man establishmentsSafer than 83% of graded establishments in this industry, whose median TCR is 5.8.
Mohawk UNILIN North American Flooring has an average TCR of 1.9, which is 59% of the industry average (3.3) for Hardwood veneer or plywood manufacturing. This is better than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for Mohawk UNILIN North American Flooring
Between 2016 and 2017, Mohawk UNILIN North American Flooring's Total Case Rate improved from 2.9 to 0.9 recordable injuries per 100 full-time workers, a 67% decrease across 1 year of OSHA reporting.
The safest year on record was 2017, at a TCR of 0.9, while 2016 saw the highest rate, at 2.9, a spread of 2.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, Mohawk UNILIN North American Flooring recorded 18 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Mohawk UNILIN North American Flooring's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 321211 - Hardwood veneer or plywood manufacturing.
DART Rate, Transparent Calculation (2017)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 631,055 hours worked = 0.63 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Mohawk UNILIN North American Flooring (this establishment) | 1.94 | OSHA ITA Form 300A, 2-year avg |
| Hardwood veneer or plywood manufacturing industry avg | 3.30 | BLS IIF, NAICS 321211 |
| Virginia state avg (all industries) | 4.16 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Mohawk UNILIN North American Flooring to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 15 reportable incidents · 15 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2017 | 0.9 | 0.6 | 3 | 0 | 0 |
| 2016 | 2.9 | 2.9 | 15 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Mohawk UNILIN North American Flooring's reported OSHA injury record, strong versus its Hardwood veneer or plywood manufacturing peers, but not a guarantee about any single site today.
- At 59% of the Hardwood veneer or plywood manufacturing benchmark, Mohawk UNILIN North American Flooring reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Hardwood veneer or plywood manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Mohawk UNILIN North American Flooring's safety grade?
How many injuries has Mohawk UNILIN North American Flooring reported?
Similar Employers
Matched by safety record across the industry and by workforce size within Virginia - a different peer set than the category browse links below.
Similar TCR (~1.9)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.