Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing · New Mexico
Montell Fabrication and Rebuild LLC
Deming, NM · ~26 workers · 5 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 1.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Montell Fabrication and Rebuild LLC runs at 56% of its industry's injury rate - safer than the typical Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing workplace, earning a grade B.
Montell Fabrication and Rebuild LLC: 1.9 TCR = 56% of Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS 3.3 · 5y Form 300A (see methodology below)
Montell Fabrication and Rebuild LLC safety composite
Montell Fabrication and Rebuild LLC scores strongest on dart rate (safer than 81% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
73/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- B 1.86 per 100 workers
Safer than 80% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 81% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Montell Fabrication and Rebuild LLC held a steady TCR band
Montell Fabrication and Rebuild LLC's TCR held near 0.0 from 0.0 in 2020 to 0.0 in 2024. Peak filing year was 2021 at 7.0 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2020=0.0 · 2021=7.0 · 2022=2.3 · 2023=0.0 · 2024=0.0
OSHA ITA Form 300A scorecard
Establishment book 332313 · Deming, NM AT/BELOW-IND · SMALL
Grade B · TCR 1.9 · 56% of ind
- DART 0.0 DART
- RANK P80
- PHOTO BMW (Paint Shop)
- BOOK 5y book
- INJ 3 inj
- SIZE ~26 FTE
Nearest TCR peer: BMW (Paint Shop) (0.0 TCR gap)
Read with this employer → · Industry book → · New Mexico employers → · Look up another →
Montell Fabrication and Rebuild LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Montell Fabrication and Rebuild LLC
1.9 TCR
- BMW (Paint Sho
BMW (Paint Shop)
1.9 TCR
- Jenidas Corpor
Jenidas Corporation DBA Gene Davis Sales and Service
1.9 TCR
- Bloom Engineer
Bloom Engineering Company Inc
1.9 TCR
- AT&F Wisconsin
AT&F Wisconsin, LLC
1.8 TCR
What this shows Montell Fabrication and Rebuild LLC averages 1.9 TCR (56% of the Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS benchmark).
Montell Fabrication and Rebuild LLC TCR series: 2020=0 · 2021=7 · 2022=2.3 · 2023=0 · 2024=0 · BLS 3.3
Where Montell Fabrication and Rebuild LLC falls in its industry
449 Plate work (e.g., bending, cut establishmentsSafer than 80% of graded establishments in this industry, whose median TCR is 4.5.
Montell Fabrication and Rebuild LLC has fewer employees than the Plate work (e.g., bending, cutting, punc median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 2.3 | 2.3 | 1 | 0 | 0 |
| 2021 | 7.0 | 7.0 | 2 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332313 · NM · Deming
449 Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing employers nationwide with a credible TCR · 2,241 rated employers in New Mexico with headcount on file · 21 employers in Deming, NM · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | BMW (Paint Shop) | 1.9 TCR |
| NAICS-TCR | Jenidas Corporation DBA Gene Davis Sales and Service | 1.9 TCR |
| NAICS-TCR | Bloom Engineering Company Inc | 1.9 TCR |
| NAICS-TCR | AT&F Wisconsin, LLC | 1.8 TCR |
| STATE-SIZE | Billy The Kid Produce LLC | 26 FTE |
| STATE-SIZE | Solar Smart Living, LLC | 26 FTE |
| STATE-SIZE | Clovis Service Center | 26 FTE |
| STATE-SIZE | Alb Reeves Station | 26 FTE |
| CITY-NEAR | WM 5166 | 294 FTE |
| CITY-NEAR | 5166 | 291 FTE |
| CITY-NEAR | 7150 | 288 FTE |
| CITY-NEAR | Luna County | 265 FTE |
| NAT-TCR | Ndx Oral Arts Dental Laboratory | 1.9 TCR |
| NAT-TCR | Perfetto Contracting Co. Inc. | 1.9 TCR |
| NAT-TCR | Crescent Park Corporation C-10 | 1.9 TCR |
| NAT-TCR | Fareway Stores, Inc. 998 Muscatine | 1.9 TCR |
| NAT-SIZE | VA Beach Store #1303 | 26 FTE |
| NAT-SIZE | Southern Comfort of Charlotte Inc | 26 FTE |
| NAT-SIZE | Derecktor Maine LLC | 26 FTE |
| NAT-SIZE | R11 Morrisville VT | 26 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.