Graphite specialties for mechanical use (except gaskets) manufacturing · Pennsylvania
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA
Saint Marys, PA · ~205 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 2.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA runs at 83% of its industry's injury rate - about level with the typical Graphite specialties for mechanical use (except gaskets) manufacturing workplace, earning a grade C.
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA: 2.7 TCR = 83% of Graphite specialties for mechanical use (except gaskets) manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA safety composite
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA scores strongest on total case rate (tcr) (safer than 58% of same-industry peers) and weakest on dart rate (safer than 38%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
49/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.73 per 100 workers
Safer than 58% of industry peers
- DART rate
- D 2.04 per 100 workers
Safer than 38% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA: 2.1 → 4.1 TCR
Peak year 2019 @ 4.1 TCR · DART/TCR 0.75× in 2019
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA's TCR rose 2.0 from 2.1 in 2016 to 4.1 in 2019. In 2019, DART was 0.75× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 335991 · Saint Marys, PA AT/BELOW-IND · MID
Grade C · TCR 2.7 · 83% of ind
- DART 2.0 DART
- RANK #5/15
- PHOTO Sekisui Aerospace - …
- BOOK 3y book
- INJ 16 inj
- SIZE ~205 FTE
Nearest TCR peer: Sekisui Aerospace - Orange City Operations (0.0 TCR gap)
Read with this employer → · Industry book → · Pennsylvania employers → · Look up another →
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Sekisui Aerosp
Sekisui Aerospace - Orange City Operations
2.8 TCR
- This site
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA
2.7 TCR
- Graphite Sales
Graphite Sales Inc.
2.7 TCR
- Mitsubishi Che
Mitsubishi Chemical Carbon Fiber & Composites
2.6 TCR
- Morgan Advance
Morgan Advanced Materials and Technology, Inc. - Coudersport, PA
2.6 TCR
What this shows Morgan Advanced Materials and Technology, Inc. - St. Marys, PA averages 2.7 TCR (83% of the Graphite specialties for mechanical use (except gaskets) manufacturing BLS benchmark).
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA TCR series: 2016=2.1 · 2017=2 · 2019=4.1 · BLS 3.3
Where Morgan Advanced Materials and Technology, Inc. - St. Marys, PA falls in its industry
93 Graphite specialties for mecha establishmentsSafer than 58% of graded establishments in this industry, whose median TCR is 3.2.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #5 safest of 15 Graphite specialties for mecha employers in Pennsylvania.
Morgan Advanced Materials and Technology, Inc. - St. Marys, PA has more employees than the Graphite specialties for mechanical use median and a lower injury rate than the industry's median TCR of 3.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 4.1 | 2.0 | 8 | 0 | 0 |
| 2017 | 2.0 | 1.0 | 4 | 0 | 0 |
| 2016 | 2.1 | 0.5 | 4 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
335991 · PA · Saint Marys
93 Graphite specialties for mechanical use (except gaskets) manufacturing employers nationwide with a credible TCR · 22,692 rated employers in Pennsylvania with headcount on file · 22 employers in Saint Marys, PA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Sekisui Aerospace - Orange City Operations | 2.8 TCR |
| NAICS-TCR | Graphite Sales Inc. | 2.7 TCR |
| NAICS-TCR | Mitsubishi Chemical Carbon Fiber & Composites | 2.6 TCR |
| NAICS-TCR | Morgan Advanced Materials and Technology, Inc. - Coudersport, PA | 2.6 TCR |
| STATE-SIZE | Barrel o'Fun Snack Foods Co. East LLC | 205 FTE |
| STATE-SIZE | WCR | 205 FTE |
| STATE-SIZE | CCL Tube, Ind. Wilkes-Barre | 205 FTE |
| STATE-SIZE | Cardinal IG - Wilkes-Barre IG | 205 FTE |
| CITY-NEAR | Keystone Powdered Metal Company | 462 FTE |
| CITY-NEAR | 1792 | 310 FTE |
| CITY-NEAR | WM 1792 | 307 FTE |
| CITY-NEAR | American Axles Manufactuing St. Marys | 186 FTE |
| NAT-TCR | Executive Management Services, Inc | 2.7 TCR |
| NAT-TCR | K&E Excavating, Inc. | 2.7 TCR |
| NAT-TCR | Richardsons | 2.7 TCR |
| NAT-TCR | Canton Parts Distibution Center | 2.7 TCR |
| NAT-SIZE | Second Florida Living Options LLC | 205 FTE |
| NAT-SIZE | 900 Michigan Ave NE | 205 FTE |
| NAT-SIZE | Meijer Store 150 | 205 FTE |
| NAT-SIZE | ERCI | 205 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.