Loading machines, underground mining, manufacturing · Illinois
Morton Manufacturing
Morton, IL · ~22 workers · 3 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 18.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Morton Manufacturing runs at 545% of its industry's injury rate - far more dangerous than the typical Loading machines, underground mining, manufacturing workplace, earning a grade F.
- F
- Failing Safety Record
- 18.0
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 3
- recordable injuries tracked
Grade compares Morton Manufacturing's OSHA Total Case Rate of 18.0 to the Loading machines, underground mining, manufacturing BLS benchmark of 3.3 (545% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Morton Manufacturing's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Morton Manufacturing falls in its industry
122 Loading machines, underground establishmentsSafer than 0% of graded establishments in this industry, whose median TCR is 2.6.
Narrower to Illinois alone (the establishments it most directly competes with for workers and contracts): ranked #14 safest of 14 Loading machines, underground employers in Illinois.
Trend analysis for Morton Manufacturing
Between 2020 and 2022, Morton Manufacturing's Total Case Rate worsened from 3.8 to 45.7 recordable injuries per 100 full-time workers, a 1097% increase across 2 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 3.8, while 2022 saw the highest rate, at 45.7, a spread of 41.9 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, Morton Manufacturing recorded 3 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 3 injuries shown on this page for Morton Manufacturing are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333131 - Loading machines, underground mining, manufacturing.
DART Rate, Transparent Calculation (2022)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 4,374 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Morton Manufacturing (this establishment) | 17.99 | OSHA ITA Form 300A, 3-year avg |
| Amalgamators (i.e., metallurgical and mining machinery) manufacturing industry avg | 3.30 | BLS IIF, NAICS 333131 |
| Illinois state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Morton Manufacturing to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2022: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2022 | 45.7 | 0.0 | 1 | 0 | 0 |
| 2021 | 4.4 | 0.0 | 1 | 0 | 0 |
| 2020 | 3.8 | 3.8 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Morton Manufacturing's reported OSHA injury record versus its Loading machines, underground mining, manufacturing peers, not a verdict on whether any single site is safe today.
- At 545% of the Loading machines, underground mining, manufacturing benchmark, Morton Manufacturing reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Loading machines, underground mining, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Morton Manufacturing's safety grade?
How many injuries has Morton Manufacturing reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Illinois, and by nearby establishments in Morton - a different peer set than the category browse links below.
Similar TCR (~18.0)
Similar size (~22 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.