Heat treating metals and metal products for the trade · Michigan

MPC

Warren, MI · ~30 workers · 9 years of OSHA Injury Tracking Application data.

D
Poor Safety Record
5.2
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

MPC runs at 156% of its industry's injury rate - more dangerous than the typical Heat treating metals and metal products for the trade workplace, earning a grade D.

MPC: 5.2 TCR = 156% of Heat treating metals and metal products for the trade BLS 3.3 · 9y Form 300A (see methodology below)

MPC safety composite

MPC scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 23%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

36/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
D 5.15 per 100 workers

Safer than 38% of industry peers

DART rate
F 4.87 per 100 workers

Safer than 23% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

MPC: 2.8 → 4.9 TCR

Peak year 2018 @ 9.7 TCR · DART/TCR 0.95× in 2024

MPC's TCR rose 2.1 from 2.8 in 2016 to 4.9 in 2024. Peak filing year was 2018 at 9.7 TCR. In 2024, DART was 0.95× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332811 · Warren, MI ABOVE-IND · SMALL

Grade D · TCR 5.2 · 156% of ind

  • DART 4.9 DART
  • RANK #25/43
  • PHOTO Diamond Heat Treat
  • BOOK 9y book
  • INJ 15 inj
  • SIZE ~30 FTE

Nearest TCR peer: Diamond Heat Treat (0.0 TCR gap)

Read with this employer → · Industry book → · Michigan employers → · Look up another →

MPC in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows MPC averages 5.2 TCR (156% of the Heat treating metals and metal products for the trade BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

MPC TCR series: 2016=2.8 · 2017=6 · 2018=9.7 · 2019=0 · 2020=6.2 · 2021=2.7 · 2022=9.6 · 2023=4.5 · 2024=4.9 · BLS 3.3

Where MPC falls in its industry

248 Heat treating metals and metal establishments

Safer than 38% of graded establishments in this industry, whose median TCR is 4.2.

More dangerous than peersSafer than peers

Narrower to Michigan alone (the establishments it most directly competes with for workers and contracts): ranked #25 safest of 43 Heat treating metals and metal employers in Michigan.

MPC (30 employees, TCR 5.2) among 29 same-industry peers, split at the industry median of 38 employees and a TCR of 4.2 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 05001,0001,5002,000 051015 Average employees Total Case Rate MPC
MPC (30 employees, TCR 5.2) among 29 same-industry peers, split at the industry median of 38 employees and a TCR of 4.2

MPC has fewer employees than the Heat treating metals and metal products median and a higher injury rate than the industry's median TCR of 4.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 4.9 4.9 2 0 0
2023 4.5 0.0 1 1 0
2022 9.6 4.8 3 1 0
2021 2.7 2.7 1 0 0
2020 6.2 3.1 2 0 0
2019 0.0 0.0 0 0 0
2018 9.7 3.2 3 0 0
2017 6.0 0.0 2 0 0
2016 2.8 0.0 1 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332811 · MI · Warren

248 Heat treating metals and metal products for the trade employers nationwide with a credible TCR · 16,393 rated employers in Michigan with headcount on file · 290 employers in Warren, MI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Diamond Heat Treat 5.1 TCR
NAICS-TCR Bodycote Thermal Processing Inc - Melrose Park 5.1 TCR
NAICS-TCR Turbocam Dover 5.2 TCR
NAICS-TCR Bodycote Thermal Processing, Inc. - Greensburg 5.2 TCR
STATE-SIZE Kitchen Farms, Inc. 30 FTE
STATE-SIZE Revolution Farms 30 FTE
STATE-SIZE TES Filer City Station 30 FTE
STATE-SIZE United Fermi II Nuclear Power Plant Project 30 FTE
CITY-NEAR Warren Technical Center 22,693 FTE
CITY-NEAR GM Global Technical Center 21,000 FTE
CITY-NEAR Warren Truck Assembly Plant 3,804 FTE
CITY-NEAR 1855-MIDET153 1,903 FTE
NAT-TCR Construction and Service 5.2 TCR
NAT-TCR Memorial Hermann Northeast Hospital 5.2 TCR
NAT-TCR Wabash Ave 5.2 TCR
NAT-TCR The Fresh Market 216 5.2 TCR
NAT-SIZE York Energy Center 30 FTE
NAT-SIZE Kennedy International Airport Power Plant 30 FTE
NAT-SIZE ADMINISTRATION 30 FTE
NAT-SIZE Beecroft Construction 30 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.