Tapered roller bearings manufacturing · Tennessee
Nakatetsu Machining Technologies, LLC
Telford, TN · ~61 workers · 5 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Nakatetsu Machining Technologies, LLC runs at 146% of its industry's injury rate - more dangerous than the typical Tapered roller bearings manufacturing workplace, earning a grade D.
Nakatetsu Machining Technologies, LLC: 4.8 TCR = 146% of Tapered roller bearings manufacturing BLS 3.3 · 5y Form 300A (see methodology below)
Nakatetsu Machining Technologies, LLC safety composite
Nakatetsu Machining Technologies, LLC scores strongest on dart rate (safer than 82% of same-industry peers) and weakest on total case rate (tcr) (safer than 28%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
52/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 4.81 per 100 workers
Safer than 28% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 82% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−5.5
2016→2023
Nakatetsu Machining Technologies, LLC injury rate improved
Nakatetsu Machining Technologies, LLC's TCR fell 5.5 from 8.0 in 2016 to 2.4 in 2023. Peak filing year was 2018 at 9.0 TCR. In 2023, DART was 0× this establishment's average TCR (severity share of cases).
2016=8.0 · 2017=4.6 · 2018=9.0 · 2021=0.0 · 2023=2.4
OSHA ITA Form 300A scorecard
Establishment book 332991 · Telford, TN ABOVE-IND · SMALL
Grade D · TCR 4.8 · 146% of ind
- DART 0.0 DART
- RANK #3/5
- PHOTO Pacific Bearing Corp.
- BOOK 5y book
- INJ 16 inj
- SIZE ~61 FTE
Nearest TCR peer: Pacific Bearing Corp. (0.1 TCR gap)
Read with this employer → · Industry book → · Tennessee employers → · Look up another →
Nakatetsu Machining Technologies, LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Carter Manufac
Carter Manufacturing
5 TCR
- This site
Nakatetsu Machining Technologies, LLC
4.8 TCR
- Pacific Bearin
Pacific Bearing Corp.
4.8 TCR
- SN Precision E
SN Precision Enterprises Inc dba Pacamor Kubar Bearings
4.7 TCR
- RBC SouthWest
RBC SouthWest Products
4.7 TCR
What this shows Nakatetsu Machining Technologies, LLC averages 4.8 TCR (146% of the Tapered roller bearings manufacturing BLS benchmark).
Nakatetsu Machining Technologies, LLC TCR series: 2016=8 · 2017=4.6 · 2018=9 · 2021=0 · 2023=2.4 · BLS 3.3
Where Nakatetsu Machining Technologies, LLC falls in its industry
125 Tapered roller bearings manufa establishmentsSafer than 28% of graded establishments in this industry, whose median TCR is 2.8.
Narrower to Tennessee alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 5 Tapered roller bearings manufa employers in Tennessee.
Nakatetsu Machining Technologies, LLC has fewer employees than the Tapered roller bearings manufacturing median and a higher injury rate than the industry's median TCR of 2.8. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 2.4 | 0.0 | 1 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 9.0 | 9.0 | 6 | 0 | 0 |
| 2017 | 4.6 | 3.1 | 3 | 0 | 0 |
| 2016 | 8.0 | 5.3 | 6 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332991 · TN · Telford
125 Tapered roller bearings manufacturing employers nationwide with a credible TCR · 10,743 rated employers in Tennessee with headcount on file · 3 employers in Telford, TN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Pacific Bearing Corp. | 4.8 TCR |
| NAICS-TCR | SN Precision Enterprises Inc dba Pacamor Kubar Bearings | 4.7 TCR |
| NAICS-TCR | RBC SouthWest Products | 4.7 TCR |
| NAICS-TCR | Carter Manufacturing | 5.0 TCR |
| STATE-SIZE | CORPORATE OFFICE | 61 FTE |
| STATE-SIZE | Tri-State Utility Construction, LLC | 61 FTE |
| STATE-SIZE | JOB 230B | 61 FTE |
| STATE-SIZE | Blount County Highway Dept | 61 FTE |
| CITY-NEAR | Sungwoo Hitech America Corp Telford Plant | 118 FTE |
| CITY-NEAR | Nakatetsu Machining | 41 FTE |
| NAT-TCR | Snyder's-Lance Inc. IN | 4.8 TCR |
| NAT-TCR | Scavuzzos Inc | 4.8 TCR |
| NAT-TCR | Safari Electric, LLC. | 4.8 TCR |
| NAT-TCR | AgMart Produce CFL | 4.8 TCR |
| NAT-SIZE | Brentwood Industries Inc. | 61 FTE |
| NAT-SIZE | UBE Machinery, Inc. | 61 FTE |
| NAT-SIZE | Plant | 61 FTE |
| NAT-SIZE | Urban N. Zink Contractor, Inc. | 61 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.