Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing · Pennsylvania

Pittsburgh Plant

Pittsburgh, PA · ~38 workers · 8 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
10.0
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Pittsburgh Plant runs at 302% of its industry's injury rate - far more dangerous than the typical Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing workplace, earning a grade F.

F
Failing Safety Record
10.0
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
30
recordable injuries tracked

Grade compares Pittsburgh Plant's OSHA Total Case Rate of 10.0 to the Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS benchmark of 3.3 (302% of benchmark) across 8 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

Pittsburgh Plant's yearly Total Case Rate, against the 3.3 industry benchmark.

-505101520 20172018201920202021202220232024 03.3 Industry benchmarkPittsburgh Plant TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332313.

Where Pittsburgh Plant falls in its industry

470 Plate work (e.g., bending, cut establishments

Safer than 11% of graded establishments in this industry, whose median TCR is 4.2.

More dangerous than peersSafer than peers

Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #34 safest of 39 Plate work (e.g., bending, cut employers in Pennsylvania.

Trend analysis for Pittsburgh Plant

Between 2017 and 2024, Pittsburgh Plant's Total Case Rate improved from 13.5 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 7 years of OSHA reporting.

The safest year on record was 2023, at a TCR of 0.0, while 2018 saw the highest rate, at 18.7, a spread of 18.7 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 8 reporting years, Pittsburgh Plant recorded 30 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 8-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 30 injuries shown on this page for Pittsburgh Plant are sourced from its own 8 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332313 - Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 64,683 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Pittsburgh Plant (this establishment) 9.97 OSHA ITA Form 300A, 8-year avg
Fabricated plate work manufacturing industry avg 3.30 BLS IIF, NAICS 332313
Pennsylvania state avg (all industries) 5.06 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Pittsburgh Plant to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.0 0.0 0 0 0
2023 0.0 0.0 0 0 0
2022 8.1 0.0 2 0 0
2021 11.3 7.5 3 0 0
2020 11.3 11.3 3 0 0
2019 16.9 10.6 8 0 0
2018 18.7 7.0 8 0 0
2017 13.5 9.0 6 0 0

What this grade means for you

Use this grade as a relative read on Pittsburgh Plant's reported OSHA injury record versus its Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing peers, not a verdict on whether any single site is safe today.

  • At 302% of the Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing benchmark, Pittsburgh Plant reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Pittsburgh Plant's safety grade?
Pittsburgh Plant has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 10.0 compared to the BLS industry benchmark of 3.3 for Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing.
How many injuries has Pittsburgh Plant reported?
Pittsburgh Plant has reported 30 total injuries and 0 fatalities across 8 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Pennsylvania, and by nearby establishments in Pittsburgh - a different peer set than the category browse links below.

Similar TCR (~10.0)

Similar size (~38 workers)

Nearby in Pittsburgh

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.