Bolts, metal, manufacturing · California

Providien Machining and Metals

Sylmar, CA · ~57 workers · 5 years of OSHA Injury Tracking Application data.

B
Good Safety Record
1.9
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Providien Machining and Metals runs at 58% of its industry's injury rate - safer than the typical Bolts, metal, manufacturing workplace, earning a grade B.

Providien Machining and Metals: 1.9 TCR = 58% of Bolts, metal, manufacturing BLS 3.3 · 5y Form 300A (see methodology below)

Providien Machining and Metals safety composite

Providien Machining and Metals scores strongest on total case rate (tcr) (safer than 77% of same-industry peers) and weakest on dart rate (safer than 40%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

57/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
B 1.92 per 100 workers

Safer than 77% of industry peers

DART rate
D 2.12 per 100 workers

Safer than 40% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−0.4

2019→2023

Providien Machining and Metals injury rate improved

Providien Machining and Metals's TCR fell 0.4 from 2.5 in 2019 to 2.1 in 2023. Peak filing year was 2020 at 5.0 TCR. In 2023, DART was 1.1× this establishment's average TCR (severity share of cases).

2019=2.5 · 2020=5.0 · 2021=0.0 · 2022=0.0 · 2023=2.1

OSHA ITA Form 300A scorecard

Establishment book 332722 · Sylmar, CA AT/BELOW-IND · SMALL

Grade B · TCR 1.9 · 58% of ind

  • DART 2.1 DART
  • RANK #17/42
  • PHOTO D.W. Mack Co., Inc.
  • BOOK 5y book
  • INJ 6 inj
  • SIZE ~57 FTE

Nearest TCR peer: D.W. Mack Co., Inc. (0.0 TCR gap)

Read with this employer → · Industry book → · California employers → · Look up another →

Providien Machining and Metals in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Providien Machining and Metals averages 1.9 TCR (58% of the Bolts, metal, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Providien Machining and Metals TCR series: 2019=2.5 · 2020=5 · 2021=0 · 2022=0 · 2023=2.1 · BLS 3.3

Where Providien Machining and Metals falls in its industry

335 Bolts, metal, manufacturing establishments

Safer than 77% of graded establishments in this industry, whose median TCR is 3.5.

More dangerous than peersSafer than peers

Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #17 safest of 42 Bolts, metal, manufacturing employers in California.

Providien Machining and Metals (57 employees, TCR 1.9) among 29 same-industry peers, split at the industry median of 80 employees and a TCR of 3.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400500 05101520 Average employees Total Case Rate Providien Machining and Metals
Providien Machining and Metals (57 employees, TCR 1.9) among 29 same-industry peers, split at the industry median of 80 employees and a TCR of 3.5

Providien Machining and Metals has fewer employees than the Bolts, metal, manufacturing median and a lower injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 2.1 2.1 1 0 0
2022 0.0 0.0 0 0 0
2021 0.0 0.0 0 0 0
2020 5.0 3.3 3 0 0
2019 2.5 2.5 2 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332722 · CA · Sylmar

335 Bolts, metal, manufacturing employers nationwide with a credible TCR · 51,834 rated employers in California with headcount on file · 112 employers in Sylmar, CA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR D.W. Mack Co., Inc. 1.9 TCR
NAICS-TCR Cleveland Division 1.9 TCR
NAICS-TCR AEROFAST, INC. 1.9 TCR
NAICS-TCR Simpson Strong-Tie 1.9 TCR
STATE-SIZE Bowles Farming Company 57 FTE
STATE-SIZE Blanc Vineyards, LLC 57 FTE
STATE-SIZE MI RANCHITO FARMING INC 57 FTE
STATE-SIZE Farmland Management Services 57 FTE
CITY-NEAR Olive View-UCLA Medical Center 2,600 FTE
CITY-NEAR CRM Sylmar CA 1,331 FTE
CITY-NEAR California Department of Transportation Facility 405 1,319 FTE
CITY-NEAR CN Sylmar 1,270 FTE
NAT-TCR HLU Services, Inc. 1.9 TCR
NAT-TCR Synventive Molding Solutions NA 1.9 TCR
NAT-TCR YNG-ODFL 1.9 TCR
NAT-TCR Topeka Ks Plant 1.9 TCR
NAT-SIZE 1725 Lkq 57 FTE
NAT-SIZE Salt Lake City 57 FTE
NAT-SIZE Times Supermarket Kihei 57 FTE
NAT-SIZE Standard Sheet Metal, Inc. 57 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2019. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.