Structural steel, fabricated, manufacturing · Ohio
Quality Welding and Fabrication LLC
Elida, OH · ~54 workers · 6 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Quality Welding and Fabrication LLC runs at 92% of its industry's injury rate - about level with the typical Structural steel, fabricated, manufacturing workplace, earning a grade C.
Quality Welding and Fabrication LLC: 3.0 TCR = 92% of Structural steel, fabricated, manufacturing BLS 3.3 · 6y Form 300A (see methodology below)
Quality Welding and Fabrication LLC safety composite
Quality Welding and Fabrication LLC scores strongest on total case rate (tcr) (safer than 67% of same-industry peers) and weakest on dart rate (safer than 33%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
51/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 3.04 per 100 workers
Safer than 67% of industry peers
- DART rate
- F 3.09 per 100 workers
Safer than 33% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Quality Welding and Fabrication LLC: 3.6 → 7.7 TCR
Peak year 2024 @ 7.7 TCR · DART/TCR 1.02× in 2024
Quality Welding and Fabrication LLC's TCR rose 4.1 from 3.6 in 2019 to 7.7 in 2024. In 2024, DART was 1.02× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332312 · Elida, OH AT/BELOW-IND · SMALL
Grade C · TCR 3.0 · 92% of ind
- DART 3.1 DART
- RANK #16/81
- PHOTO Arcosa Shoring Produ…
- BOOK 6y book
- INJ 11 inj
- SIZE ~54 FTE
Nearest TCR peer: Arcosa Shoring Products, Inc. - Mason (0.0 TCR gap)
Read with this employer → · Industry book → · Ohio employers → · Look up another →
Quality Welding and Fabrication LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Quality Welding and Fabrication LLC
3 TCR
- Arcosa Shoring
Arcosa Shoring Products, Inc. - Mason
3 TCR
- CSC Steel Jack
CSC Steel Jacksonville
3 TCR
- Nucor Harris R
Nucor Harris Rebar Salt Lake Inc. - Salt Lake Utah
3 TCR
- New Millennium
New Millennium Building Systems, LLC. - Fallon
3 TCR
What this shows Quality Welding and Fabrication LLC averages 3.0 TCR (92% of the Structural steel, fabricated, manufacturing BLS benchmark).
Quality Welding and Fabrication LLC TCR series: 2019=3.6 · 2020=1.9 · 2021=1.7 · 2022=3.3 · 2023=0 · 2024=7.7 · BLS 3.3
Where Quality Welding and Fabrication LLC falls in its industry
1,491 Structural steel, fabricated, establishmentsSafer than 67% of graded establishments in this industry, whose median TCR is 4.6.
Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #16 safest of 81 Structural steel, fabricated, employers in Ohio.
Quality Welding and Fabrication LLC has more employees than the Structural steel, fabricated, manufactur median and a lower injury rate than the industry's median TCR of 4.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 7.7 | 3.1 | 5 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 3.3 | 1.6 | 2 | 0 | 0 |
| 2021 | 1.7 | 1.7 | 1 | 0 | 0 |
| 2020 | 1.9 | 1.9 | 1 | 0 | 0 |
| 2019 | 3.6 | 3.6 | 2 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332312 · OH · Elida
1,491 Structural steel, fabricated, manufacturing employers nationwide with a credible TCR · 22,650 rated employers in Ohio with headcount on file · 4 employers in Elida, OH · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Arcosa Shoring Products, Inc. - Mason | 3.0 TCR |
| NAICS-TCR | CSC Steel Jacksonville | 3.0 TCR |
| NAICS-TCR | Nucor Harris Rebar Salt Lake Inc. - Salt Lake Utah | 3.0 TCR |
| NAICS-TCR | New Millennium Building Systems, LLC. - Fallon | 3.0 TCR |
| STATE-SIZE | C.M. Brown Nurseries, Inc. | 54 FTE |
| STATE-SIZE | Butt Construction Co., Inc. | 54 FTE |
| STATE-SIZE | Office/Shop | 54 FTE |
| STATE-SIZE | Ferguson Construction Comany-Columbus | 54 FTE |
| CITY-NEAR | Orick Stamping | 62 FTE |
| CITY-NEAR | BrennCo Inc | 36 FTE |
| CITY-NEAR | McBride Bros, Inc | 22 FTE |
| NAT-TCR | Chief Container Company, Inc. | 3.0 TCR |
| NAT-TCR | ThermaClime Technologies, Inc. | 3.0 TCR |
| NAT-TCR | Royalton Park Avenue | 3.0 TCR |
| NAT-TCR | Largo | 3.0 TCR |
| NAT-SIZE | preferred Manufacturing Services, Inc. | 54 FTE |
| NAT-SIZE | UniSea Inc | 54 FTE |
| NAT-SIZE | E-Solutions | 54 FTE |
| NAT-SIZE | Portland,OR - 524 | 54 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.