Stampings (except automotive, cans, coins), metal, unfinished, manufacturing · Texas
R-5 Metal Fabricators, Inc.
Wills Point, TX · ~36 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
R-5 Metal Fabricators, Inc. runs at 107% of its industry's injury rate - about level with the typical Stampings (except automotive, cans, coins), metal, unfinished, manufacturing workplace, earning a grade C.
R-5 Metal Fabricators, Inc.: 3.5 TCR = 107% of Stampings (except automotive, cans, coins), metal, unfinished, manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
R-5 Metal Fabricators, Inc. safety composite
R-5 Metal Fabricators, Inc. scores strongest on total case rate (tcr) (safer than 69% of same-industry peers) and weakest on dart rate (safer than 11%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
44/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 3.54 per 100 workers
Safer than 69% of industry peers
- DART rate
- F 6.52 per 100 workers
Safer than 11% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
R-5 Metal Fabricators, Inc.: 0.0 → 9.8 TCR
Peak year 2024 @ 9.8 TCR · DART/TCR 1.84× in 2024
R-5 Metal Fabricators, Inc.'s TCR rose 9.8 from 0.0 in 2022 to 9.8 in 2024. In 2024, DART was 1.84× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332119 · Wills Point, TX ABOVE-IND · SMALL
Grade C · TCR 3.5 · 107% of ind
- DART 6.5 DART
- RANK #8/22
- PHOTO Rieke Corporation- A…
- BOOK 3y book
- INJ 5 inj
- SIZE ~36 FTE
Nearest TCR peer: Rieke Corporation- Auburn (0.0 TCR gap)
Read with this employer → · Industry book → · Texas employers → · Look up another →
R-5 Metal Fabricators, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Kapco Inc. - O
Kapco Inc. - Osceola
3.6 TCR
- Collier Metal
Collier Metal Specialties LTD
3.6 TCR
- This site
R-5 Metal Fabricators, Inc.
3.5 TCR
- Rieke Corporat
Rieke Corporation- Auburn
3.5 TCR
- Houston South
Houston South
3.5 TCR
What this shows R-5 Metal Fabricators, Inc. averages 3.5 TCR (107% of the Stampings (except automotive, cans, coins), metal, unfinished, manufacturing BLS benchmark).
R-5 Metal Fabricators, Inc. TCR series: 2022=0 · 2023=0.8 · 2024=9.8 · BLS 3.3
Where R-5 Metal Fabricators, Inc. falls in its industry
477 Stampings (except automotive, establishmentsSafer than 69% of graded establishments in this industry, whose median TCR is 5.1.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #8 safest of 22 Stampings (except automotive, employers in Texas.
R-5 Metal Fabricators, Inc. has fewer employees than the Stampings (except automotive, cans, coin median and a lower injury rate than the industry's median TCR of 5.1. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 9.8 | 6.5 | 3 | 0 | 0 |
| 2023 | 0.8 | 0.8 | 2 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332119 · TX · Wills Point
477 Stampings (except automotive, cans, coins), metal, unfinished, manufacturing employers nationwide with a credible TCR · 38,394 rated employers in Texas with headcount on file · 15 employers in Wills Point, TX · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Rieke Corporation- Auburn | 3.5 TCR |
| NAICS-TCR | Houston South | 3.5 TCR |
| NAICS-TCR | Kapco Inc. - Osceola | 3.6 TCR |
| NAICS-TCR | Collier Metal Specialties LTD | 3.6 TCR |
| STATE-SIZE | FRONTIER FEED YARD | 36 FTE |
| STATE-SIZE | Paco Feedyard | 36 FTE |
| STATE-SIZE | Coyote Lake Feedyard Inc. | 36 FTE |
| STATE-SIZE | Unlimited Contract Services Waelder | 36 FTE |
| CITY-NEAR | Big Tex Manufacturing, LLC Wills Point | 173 FTE |
| CITY-NEAR | Big Tex Trailer Manufacturing, LLC. - Wills Point | 164 FTE |
| CITY-NEAR | Big Tex Wills Point | 154 FTE |
| CITY-NEAR | Freestate Crestwood | 107 FTE |
| NAT-TCR | HydroSolutions of Duluth Inc. | 3.5 TCR |
| NAT-TCR | Kheops International, Inc. | 3.5 TCR |
| NAT-TCR | Valdez Plastering, Inc. | 3.5 TCR |
| NAT-TCR | Millwork One, Inc. | 3.5 TCR |
| NAT-SIZE | Trulieve Tampa Hillsborough | 36 FTE |
| NAT-SIZE | Clazak Construction Inc | 36 FTE |
| NAT-SIZE | Allied Crawford (Jackson), Inc. | 36 FTE |
| NAT-SIZE | Harding's #397 | 36 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.