Precision turned product manufacturing · Minnesota

R/C Machining Co., Inc.

Glenwood, MN · ~18 workers · 8 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
6.6
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

R/C Machining Co., Inc. runs at 201% of its industry's injury rate - far more dangerous than the typical Precision turned product manufacturing workplace, earning a grade F.

R/C Machining Co., Inc.: 6.6 TCR = 201% of Precision turned product manufacturing BLS 3.3 · 8y Form 300A (see methodology below)

R/C Machining Co., Inc. safety composite

R/C Machining Co., Inc. scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 4%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

F

22/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 6.63 per 100 workers

Safer than 19% of industry peers

DART rate
F 8.97 per 100 workers

Safer than 4% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

R/C Machining Co., Inc.: 0.0 → 17.9 TCR

Peak year 2024 @ 17.9 TCR · DART/TCR 1.35× in 2024

R/C Machining Co., Inc.'s TCR rose 17.9 from 0.0 in 2017 to 17.9 in 2024. In 2024, DART was 1.35× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332721 · Glenwood, MN ABOVE-IND · SMALL

Grade F · TCR 6.6 · 201% of ind

  • DART 9.0 DART
  • RANK #14/17
  • PHOTO The World Class Manu…
  • BOOK 8y book
  • INJ 8 inj
  • SIZE ~18 FTE

Nearest TCR peer: The World Class Manufacturing Group (0.0 TCR gap)

Read with this employer → · Industry book → · Minnesota employers → · Look up another →

R/C Machining Co., Inc. in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows R/C Machining Co., Inc. averages 6.6 TCR (201% of the Precision turned product manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

R/C Machining Co., Inc. TCR series: 2017=0 · 2018=4.9 · 2019=11.7 · 2020=0 · 2021=6 · 2022=12.5 · 2023=0 · 2024=17.9 · BLS 3.3

Where R/C Machining Co., Inc. falls in its industry

464 Precision turned product manuf establishments

Safer than 19% of graded establishments in this industry, whose median TCR is 3.6.

More dangerous than peersSafer than peers

Narrower to Minnesota alone (the establishments it most directly competes with for workers and contracts): ranked #14 safest of 17 Precision turned product manuf employers in Minnesota.

R/C Machining Co., Inc. (18 employees, TCR 6.6) among 29 same-industry peers, split at the industry median of 61 employees and a TCR of 3.6 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400 051015 Average employees Total Case Rate R/C Machining Co., Inc.
R/C Machining Co., Inc. (18 employees, TCR 6.6) among 29 same-industry peers, split at the industry median of 61 employees and a TCR of 3.6

R/C Machining Co., Inc. has fewer employees than the Precision turned product manufacturing median and a higher injury rate than the industry's median TCR of 3.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 17.9 9.0 2 0 0
2023 0.0 0.0 0 0 0
2022 12.5 0.0 2 0 0
2021 6.0 0.0 1 0 0
2020 0.0 0.0 0 0 0
2019 11.7 5.9 2 0 0
2018 4.9 0.0 1 0 0
2017 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332721 · MN · Glenwood

464 Precision turned product manufacturing employers nationwide with a credible TCR · 15,828 rated employers in Minnesota with headcount on file · 15 employers in Glenwood, MN · 4 cross-state NAT-TCR peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR The World Class Manufacturing Group 6.7 TCR
NAICS-TCR Segepo-FSM 6.6 TCR
NAICS-TCR Machining Group 6.6 TCR
NAICS-TCR Stamping Group 6.7 TCR
STATE-SIZE WPI-Fieldstaff 18 FTE
STATE-SIZE Select Genetics MN Magnum 003-0138-MA 18 FTE
STATE-SIZE Mesabi Metallics 18 FTE
STATE-SIZE Vigen Construction- Erskine 18 FTE
CITY-NEAR Glacial Ridge Health System 344 FTE
CITY-NEAR Glenwood 272 FTE
CITY-NEAR Minnewaska Area Schools #2149 124 FTE
CITY-NEAR Minnewaska Area HS 121 FTE
NAT-TCR 704KEN 6.6 TCR
NAT-TCR Bedford Stone & Masonry Supply Corp 6.6 TCR
NAT-TCR Millwood, Inc. Melrose Park 6.6 TCR
NAT-TCR Heritage Hall King George 6.6 TCR

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.