Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants · New York
RMD
Rome, NY · ~89 workers · 7 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
RMD runs at 73% of its industry's injury rate - safer than the typical Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants workplace, earning a grade B.
RMD: 2.4 TCR = 73% of Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants BLS 3.3 · 7y Form 300A (see methodology below)
RMD safety composite
RMD scores strongest on total case rate (tcr) (safer than 64% of same-industry peers) and weakest on dart rate (safer than 35%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
51/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.4 per 100 workers
Safer than 64% of industry peers
- DART rate
- D 2.78 per 100 workers
Safer than 35% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
RMD: 0.0 → 3.5 TCR
Peak year 2021 @ 5.8 TCR · DART/TCR 1.16× in 2024
RMD's TCR rose 3.5 from 0.0 in 2018 to 3.5 in 2024. Peak filing year was 2021 at 5.8 TCR. In 2024, DART was 1.16× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 331491 · Rome, NY AT/BELOW-IND · SMALL
Grade B · TCR 2.4 · 73% of ind
- DART 2.8 DART
- RANK #4/9
- PHOTO Stryten KCMO LLC
- BOOK 7y book
- INJ 17 inj
- SIZE ~89 FTE
Nearest TCR peer: Stryten KCMO LLC (0.0 TCR gap)
Read with this employer → · Industry book → · New York employers → · Look up another →
RMD in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Howmet Aerospa
Howmet Aerospace - Niles Operations
2.5 TCR
- This site
RMD
2.4 TCR
- Stryten KCMO L
Stryten KCMO LLC
2.4 TCR
- Metallic Resou
Metallic Resources, Inc. HQ
2.4 TCR
- Special Metals
Special Metals New Hartford
2.4 TCR
What this shows RMD averages 2.4 TCR (73% of the Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants BLS benchmark).
RMD TCR series: 2018=0 · 2019=0 · 2020=0 · 2021=5.8 · 2022=5 · 2023=2.6 · 2024=3.5 · BLS 3.3
Where RMD falls in its industry
113 Bar, nonferrous metals (except establishmentsSafer than 64% of graded establishments in this industry, whose median TCR is 3.1.
Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #4 safest of 9 Bar, nonferrous metals (except employers in New York.
RMD has more employees than the Bar, nonferrous metals (except aluminum, median and a lower injury rate than the industry's median TCR of 3.1. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.5 | 2.8 | 5 | 0 | 0 |
| 2023 | 2.6 | 1.3 | 4 | 0 | 0 |
| 2022 | 5.0 | 2.5 | 6 | 2 | 0 |
| 2021 | 5.8 | 2.9 | 2 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331491 · NY · Rome
113 Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants employers nationwide with a credible TCR · 21,008 rated employers in New York with headcount on file · 88 employers in Rome, NY · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Stryten KCMO LLC | 2.4 TCR |
| NAICS-TCR | Metallic Resources, Inc. HQ | 2.4 TCR |
| NAICS-TCR | Special Metals New Hartford | 2.4 TCR |
| NAICS-TCR | Howmet Aerospace - Niles Operations | 2.5 TCR |
| STATE-SIZE | 104286 - USACE ERB Security Strength | 89 FTE |
| STATE-SIZE | Centrica Business Solutions Services, West BU | 89 FTE |
| STATE-SIZE | Quackenbush Co. Inc. | 89 FTE |
| STATE-SIZE | Air Stream Air Conditioning Corporation | 89 FTE |
| CITY-NEAR | Birnie Bus Service, Inc. | 1,548 FTE |
| CITY-NEAR | Rome Health | 963 FTE |
| CITY-NEAR | Rome Memorial Hospital | 851 FTE |
| CITY-NEAR | 2234 | 405 FTE |
| NAT-TCR | Lockheed Martin Corporation US AL Troy Airport Blvd (5209) | 2.4 TCR |
| NAT-TCR | Cadiz Markets | 2.4 TCR |
| NAT-TCR | Iowa Specialty Hospital Belmond | 2.4 TCR |
| NAT-TCR | Main Location | 2.4 TCR |
| NAT-SIZE | Randazzo Fruit Markets #2, Inc | 89 FTE |
| NAT-SIZE | The Glenny Glass Company | 89 FTE |
| NAT-SIZE | 40127 Capstone Ctna Mt Vernon | 89 FTE |
| NAT-SIZE | Provident General Contractors | 89 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.