Metal cutting saw blades manufacturing · North Carolina
Robert Bosch Tool Corporation
Lincolnton, NC · ~473 workers · 9 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.2
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Robert Bosch Tool Corporation runs at 66% of its industry's injury rate - safer than the typical Metal cutting saw blades manufacturing workplace, earning a grade B.
Robert Bosch Tool Corporation: 2.2 TCR = 66% of Metal cutting saw blades manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
Robert Bosch Tool Corporation safety composite
Robert Bosch Tool Corporation scores strongest on total case rate (tcr) (safer than 71% of same-industry peers) and weakest on dart rate (safer than 40%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
55/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.18 per 100 workers
Safer than 71% of industry peers
- DART rate
- D 2.11 per 100 workers
Safer than 40% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Robert Bosch Tool Corporation: 1.8 → 2.3 TCR
Peak year 2020 @ 3.0 TCR · DART/TCR 0.97× in 2024
Robert Bosch Tool Corporation's TCR rose 0.5 from 1.8 in 2016 to 2.3 in 2024. Peak filing year was 2020 at 3.0 TCR. In 2024, DART was 0.97× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332216 · Lincolnton, NC AT/BELOW-IND · MID
Grade B · TCR 2.2 · 66% of ind
- DART 2.1 DART
- RANK #4/8
- PHOTO Specialty Fabricator…
- BOOK 9y book
- INJ 91 inj
- SIZE ~473 FTE
Nearest TCR peer: Specialty Fabricators, LLC (0.0 TCR gap)
Read with this employer → · Industry book → · North Carolina employers → · Look up another →
Robert Bosch Tool Corporation in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Robert Bosch Tool Corporation
2.2 TCR
- Specialty Fabr
Specialty Fabricators, LLC
2.2 TCR
- Leitz Tooling
Leitz Tooling Systems LP - Michigan
2.2 TCR
- Tekton, Inc
Tekton, Inc
2.2 TCR
- C.S. Osborne &
C.S. Osborne & Co.
2.2 TCR
What this shows Robert Bosch Tool Corporation averages 2.2 TCR (66% of the Metal cutting saw blades manufacturing BLS benchmark).
Robert Bosch Tool Corporation TCR series: 2016=1.8 · 2017=1.8 · 2018=1.2 · 2019=1.8 · 2020=3 · 2021=2.6 · 2022=2.8 · 2023=2.3 · 2024=2.3 · BLS 3.3
Where Robert Bosch Tool Corporation falls in its industry
174 Metal cutting saw blades manuf establishmentsSafer than 71% of graded establishments in this industry, whose median TCR is 3.6.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #4 safest of 8 Metal cutting saw blades manuf employers in North Carolina.
Robert Bosch Tool Corporation has more employees than the Metal cutting saw blades manufacturing median and a lower injury rate than the industry's median TCR of 3.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 2.3 | 2.1 | 13 | 0 | 0 |
| 2023 | 2.3 | 1.7 | 13 | 1 | 0 |
| 2022 | 2.8 | 2.0 | 17 | 0 | 0 |
| 2021 | 2.6 | 1.9 | 12 | 0 | 0 |
| 2020 | 3.0 | 2.6 | 16 | 0 | 0 |
| 2019 | 1.8 | 1.8 | 8 | 0 | 0 |
| 2018 | 1.2 | 1.0 | 5 | 0 | 0 |
| 2017 | 1.8 | 0.0 | 5 | 1 | 0 |
| 2016 | 1.8 | 0.6 | 2 | 1 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332216 · NC · Lincolnton
174 Metal cutting saw blades manufacturing employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 71 employers in Lincolnton, NC · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Specialty Fabricators, LLC | 2.2 TCR |
| NAICS-TCR | Leitz Tooling Systems LP - Michigan | 2.2 TCR |
| NAICS-TCR | Tekton, Inc | 2.2 TCR |
| NAICS-TCR | C.S. Osborne & Co. | 2.2 TCR |
| STATE-SIZE | Wayne Brothers Inc. | 473 FTE |
| STATE-SIZE | Forest City Permanent | 473 FTE |
| STATE-SIZE | NCCAADNC | 473 FTE |
| STATE-SIZE | Gildan Yarns, LLC (Plant # 75) | 472 FTE |
| CITY-NEAR | RSI Home Products | 769 FTE |
| CITY-NEAR | 1109-Atrium Health Lincoln (1109) | 672 FTE |
| CITY-NEAR | American Woodmark Corporation | 671 FTE |
| CITY-NEAR | 0050-Atrium Health Lincoln | 653 FTE |
| NAT-TCR | Saint-Gobain Abrasives | 2.2 TCR |
| NAT-TCR | Jax Inc. | 2.2 TCR |
| NAT-TCR | Cinfab | 2.2 TCR |
| NAT-TCR | The Classic at Hillcrest Greens | 2.2 TCR |
| NAT-SIZE | Dave Jones Inc. | 473 FTE |
| NAT-SIZE | DC12 | 473 FTE |
| NAT-SIZE | Spooky Nook Sports Inc. | 473 FTE |
| NAT-SIZE | WellStar Windy Hill Hospital | 473 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.