Metal cutting machine tools manufacturing · North Carolina
Sandvik Mebane (Holding/Coromant)
Mebane, NC · ~369 workers · 3 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 0.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Sandvik Mebane (Holding/Coromant) runs at 3% of its industry's injury rate - far safer than the typical Metal cutting machine tools manufacturing workplace, earning a grade A.
Sandvik Mebane (Holding/Coromant): 0.1 TCR = 3% of Metal cutting machine tools manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
Sandvik Mebane (Holding/Coromant) safety composite
Sandvik Mebane (Holding/Coromant) scores strongest on total case rate (tcr) (safer than 99% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
78/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- A 0.1 per 100 workers
Safer than 99% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 75% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Sandvik Mebane (Holding/Coromant) held a steady TCR band
Sandvik Mebane (Holding/Coromant)'s TCR held near 0.3 from 0.0 in 2021 to 0.3 in 2023. In 2023, DART was 0× this establishment's average TCR (severity share of cases).
2021=0.0 · 2022=0.0 · 2023=0.3
OSHA ITA Form 300A scorecard
Establishment book 333517 · Mebane, NC AT/BELOW-IND · MID
Grade A · TCR 0.1 · 3% of ind
- DART 0.0 DART
- RANK #1/4
- PHOTO Saelens/Diamond prec…
- BOOK 3y book
- INJ 1 inj
- SIZE ~369 FTE
Nearest TCR peer: Saelens/Diamond precision (0.1 TCR gap)
Read with this employer → · Industry book → · North Carolina employers → · Look up another →
Sandvik Mebane (Holding/Coromant) in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Control Micro 0.3
Control Micro Systems
0.3 TCR
- Sandvik Fair L 0.2
Sandvik Fair Lawn
0.2 TCR
- Decatur Diamon 0.2
Decatur Diamond, LLC
0.2 TCR
- This site 0.1
Sandvik Mebane (Holding/Coromant)
0.1 TCR
- Saelens/Diamon 0
Saelens/Diamond precision
0 TCR
What this shows Sandvik Mebane (Holding/Coromant) averages 0.1 TCR (3% of the Metal cutting machine tools manufacturing BLS benchmark).
Sandvik Mebane (Holding/Coromant) TCR series: 2021=0 · 2022=0 · 2023=0.3 · BLS 3.3
Where Sandvik Mebane (Holding/Coromant) falls in its industry
391 Metal cutting machine tools ma establishmentsSafer than 99% of graded establishments in this industry, whose median TCR is 3.4.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 4 Metal cutting machine tools ma employers in North Carolina.
Sandvik Mebane (Holding/Coromant) has more employees than the Metal cutting machine tools manufacturin median and a lower injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 0.3 | 0.0 | 1 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
333517 · NC · Mebane
391 Metal cutting machine tools manufacturing employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 71 employers in Mebane, NC · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Saelens/Diamond precision | 0.0 TCR |
| NAICS-TCR | Sandvik Fair Lawn | 0.2 TCR |
| NAICS-TCR | Decatur Diamond, LLC | 0.2 TCR |
| NAICS-TCR | Control Micro Systems | 0.3 TCR |
| STATE-SIZE | BARNES FARMING CORP | 369 FTE |
| STATE-SIZE | WM 4224 | 369 FTE |
| STATE-SIZE | WM 1348 | 369 FTE |
| STATE-SIZE | Schneider Electric Knightdale | 369 FTE |
| CITY-NEAR | GKN Alamance | 912 FTE |
| CITY-NEAR | IS - MFG US - Mebane, NC | 642 FTE |
| CITY-NEAR | Industrial Solutions : IS - MFG US - Mebane, NC | 642 FTE |
| CITY-NEAR | Industrial Connections and Solutions LLC | 620 FTE |
| NAT-TCR | Atlantic-Gulf : Houston | 0.1 TCR |
| NAT-TCR | SIE - Los Angeles | 0.1 TCR |
| NAT-TCR | PSE&G NJ Asset Management & Planning | 0.1 TCR |
| NAT-TCR | ATLCGAMTA01 | 0.1 TCR |
| NAT-SIZE | Omaha NE (9 Cag Dr) | 369 FTE |
| NAT-SIZE | EJ-Ardmore Foundry, Inc. | 369 FTE |
| NAT-SIZE | Shaw's Wells Distribution Center | 369 FTE |
| NAT-SIZE | Dennett Road Manor | 369 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.