Compression molding machinery for plastics manufacturing · Massachusetts
SencorpWhite Inc
Hyannis, MA · ~163 workers · 2 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.7
- Avg TCR
- 3.3
- Industry avg
- 1
- Fatality
The verdict
SencorpWhite Inc runs at 142% of its industry's injury rate - more dangerous than the typical Compression molding machinery for plastics manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 4.7
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 1
- worker fatalities on record
Grade compares SencorpWhite Inc's OSHA Total Case Rate of 4.7 to the Compression molding machinery for plastics manufacturing BLS benchmark of 3.3 (142% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
SencorpWhite Inc's yearly Total Case Rate, against the 3.3 industry benchmark.
Where SencorpWhite Inc falls in its industry
499 Compression molding machinery establishmentsSafer than 25% of graded establishments in this industry, whose median TCR is 2.7.
Narrower to Massachusetts alone (the establishments it most directly competes with for workers and contracts): ranked #16 safest of 17 Compression molding machinery employers in Massachusetts.
Trend analysis for SencorpWhite Inc
Between 2023 and 2024, SencorpWhite Inc's Total Case Rate worsened from 4.4 to 4.9 recordable injuries per 100 full-time workers, a 12% increase across 1 year of OSHA reporting.
The safest year on record was 2023, at a TCR of 4.4, while 2024 saw the highest rate, at 4.9, a spread of 0.5 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, SencorpWhite Inc recorded 12 total injuries and illnesses and 1 fatality. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 12 injuries, and 1 fatality shown on this page for SencorpWhite Inc are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333249 - Compression molding machinery for plastics manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 202,773 hours worked = 1.97 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| SencorpWhite Inc (this establishment) | 4.67 | OSHA ITA Form 300A, 2-year avg |
| Chemical processing machinery and equipment manufacturing industry avg | 3.30 | BLS IIF, NAICS 333249 |
| Massachusetts state avg (all industries) | 4.94 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by SencorpWhite Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 8 reportable incidents · 7 injuries, 0 illnesses, 1 fatality - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 4.9 | 2.0 | 5 | 0 | 0 |
| 2023 | 4.4 | 2.5 | 7 | 0 | 1 |
What this grade means for you
Use this grade as a relative read on SencorpWhite Inc's reported OSHA injury record versus its Compression molding machinery for plastics manufacturing peers, not a verdict on whether any single site is safe today.
- At 142% of the Compression molding machinery for plastics manufacturing benchmark, SencorpWhite Inc reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Compression molding machinery for plastics manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is SencorpWhite Inc's safety grade?
How many injuries has SencorpWhite Inc reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Massachusetts, and by nearby establishments in Hyannis - a different peer set than the category browse links below.
Similar TCR (~4.7)
Similar size (~163 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.