Smelting and refining of nonferrous metals (except aluminum, copper), secondary · Illinois
Sipi Metals Corp
Chicago, IL · ~113 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 21.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Sipi Metals Corp runs at 665% of its industry's injury rate - far more dangerous than the typical Smelting and refining of nonferrous metals (except aluminum, copper), secondary workplace, earning a grade F.
- F
- Failing Safety Record
- 21.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 41
- recordable injuries tracked
Grade compares Sipi Metals Corp's OSHA Total Case Rate of 21.9 to the Smelting and refining of nonferrous metals (except aluminum, copper), secondary BLS benchmark of 3.3 (665% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Sipi Metals Corp's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Sipi Metals Corp falls in its industry
139 Smelting and refining of nonfe establishmentsSafer than 0% of graded establishments in this industry, whose median TCR is 3.6.
Narrower to Illinois alone (the establishments it most directly competes with for workers and contracts): ranked #10 safest of 10 Smelting and refining of nonfe employers in Illinois.
Trend analysis for Sipi Metals Corp
Between 2018 and 2019, Sipi Metals Corp's Total Case Rate improved from 24.0 to 19.9 recordable injuries per 100 full-time workers, a 17% decrease across 1 year of OSHA reporting.
The safest year on record was 2019, at a TCR of 19.9, while 2018 saw the highest rate, at 24.0, a spread of 4.2 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Sipi Metals Corp recorded 41 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 41 injuries, 1 illnesses shown on this page for Sipi Metals Corp are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331492 - Smelting and refining of nonferrous metals (except aluminum, copper), secondary.
DART Rate, Transparent Calculation (2019)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
13 DART incidents × 200,000 ÷ 171,274 hours worked = 15.18 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Sipi Metals Corp (this establishment) | 21.95 | OSHA ITA Form 300A, 2-year avg |
| Nonferrous alloys (except aluminum, copper) made in integrated secondary smelting and alloying plants industry avg | 3.30 | BLS IIF, NAICS 331492 |
| Illinois state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Sipi Metals Corp to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2019: 17 reportable incidents · 17 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 25 reportable incidents · 24 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 19.9 | 15.2 | 17 | 0 | 0 |
| 2018 | 24.0 | 7.7 | 24 | 1 | 0 |
What this grade means for you
Use this grade as a relative read on Sipi Metals Corp's reported OSHA injury record versus its Smelting and refining of nonferrous metals (except aluminum, copper), secondary peers, not a verdict on whether any single site is safe today.
- At 665% of the Smelting and refining of nonferrous metals (except aluminum, copper), secondary benchmark, Sipi Metals Corp reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Smelting and refining of nonferrous metals (except aluminum, copper), secondary sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Sipi Metals Corp's safety grade?
How many injuries has Sipi Metals Corp reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Illinois, and by nearby establishments in Chicago - a different peer set than the category browse links below.
Similar TCR (~21.9)
Similar size (~113 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.