Steel forgings made from purchased steel, unfinished · Ohio
Solmet Technologies
Canton, OH · ~35 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Solmet Technologies runs at 144% of its industry's injury rate - more dangerous than the typical Steel forgings made from purchased steel, unfinished workplace, earning a grade D.
Solmet Technologies: 4.8 TCR = 144% of Steel forgings made from purchased steel, unfinished BLS 3.3 · 9y Form 300A (see methodology below)
Solmet Technologies safety composite
Solmet Technologies scores strongest on total case rate (tcr) (safer than 53% of same-industry peers) and weakest on dart rate (safer than 45%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
50/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.76 per 100 workers
Safer than 53% of industry peers
- DART rate
- D 2.49 per 100 workers
Safer than 45% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Solmet Technologies: 3.4 → 10.0 TCR
Peak year 2017 @ 10.4 TCR · DART/TCR 0.52× in 2024
Solmet Technologies's TCR rose 6.5 from 3.4 in 2016 to 10.0 in 2024. Peak filing year was 2017 at 10.4 TCR. In 2024, DART was 0.52× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332111 · Canton, OH ABOVE-IND · SMALL
Grade D · TCR 4.8 · 144% of ind
- DART 2.5 DART
- RANK #22/41
- PHOTO LINAMAR FORGINGS CAR…
- BOOK 9y book
- INJ 15 inj
- SIZE ~35 FTE
Nearest TCR peer: LINAMAR FORGINGS CAROLINA, INC. (0.0 TCR gap)
Read with this employer → · Industry book → · Ohio employers → · Look up another →
Solmet Technologies in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Federal Carbid
Federal Carbide Company, Inc
4.9 TCR
- This site
Solmet Technologies
4.8 TCR
- LINAMAR FORGIN
LINAMAR FORGINGS CAROLINA, INC.
4.8 TCR
- Roloff Manufac
Roloff Manufacturing Corporation
4.8 TCR
- ADJ Holding Co
ADJ Holding Company
4.8 TCR
What this shows Solmet Technologies averages 4.8 TCR (144% of the Steel forgings made from purchased steel, unfinished BLS benchmark).
Solmet Technologies TCR series: 2016=3.4 · 2017=10.4 · 2018=5.6 · 2019=0 · 2020=0 · 2021=0 · 2022=8.5 · 2023=4.8 · 2024=10 · BLS 3.3
Where Solmet Technologies falls in its industry
241 Steel forgings made from purch establishmentsSafer than 53% of graded establishments in this industry, whose median TCR is 5.0.
Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #22 safest of 41 Steel forgings made from purch employers in Ohio.
Solmet Technologies has fewer employees than the Steel forgings made from purchased steel median and a lower injury rate than the industry's median TCR of 5.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 10.0 | 2.5 | 4 | 0 | 0 |
| 2023 | 4.8 | 4.8 | 2 | 0 | 0 |
| 2022 | 8.5 | 5.7 | 3 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 5.6 | 2.8 | 2 | 0 | 0 |
| 2017 | 10.4 | 3.5 | 3 | 0 | 0 |
| 2016 | 3.4 | 3.4 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332111 · OH · Canton
241 Steel forgings made from purchased steel, unfinished employers nationwide with a credible TCR · 22,650 rated employers in Ohio with headcount on file · 330 employers in Canton, OH · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | LINAMAR FORGINGS CAROLINA, INC. | 4.8 TCR |
| NAICS-TCR | Roloff Manufacturing Corporation | 4.8 TCR |
| NAICS-TCR | ADJ Holding Company | 4.8 TCR |
| NAICS-TCR | Federal Carbide Company, Inc | 4.9 TCR |
| STATE-SIZE | Location 1 | 35 FTE |
| STATE-SIZE | Nursery | 35 FTE |
| STATE-SIZE | Croton Pullet 3 | 35 FTE |
| STATE-SIZE | Hatchery 1 | 35 FTE |
| CITY-NEAR | Aultman Main Campus | 3,796 FTE |
| CITY-NEAR | Aultman Hospital | 3,406 FTE |
| CITY-NEAR | Mercy Medical Center, Inc | 2,600 FTE |
| CITY-NEAR | Cleveland Clinic Mercy Hosp | 2,321 FTE |
| NAT-TCR | Five Star Premier Residences of Reno | 4.8 TCR |
| NAT-TCR | Heatherwood Retirement Community | 4.8 TCR |
| NAT-TCR | Porter Regional Hospital | 4.8 TCR |
| NAT-TCR | Becker Automotive Designs, Inc. | 4.8 TCR |
| NAT-SIZE | 1190 Far80 | 35 FTE |
| NAT-SIZE | Heitkamp Construction Co., Inc. | 35 FTE |
| NAT-SIZE | Hajoca 741 | 35 FTE |
| NAT-SIZE | Hajoca 705 | 35 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.