Employer
SSP Main
Safety Grade
C
Avg TCR
2.7
per 100 workers
Inspections
7
years on record
Silicone rubber manufacturing · New York
2026 data Public-data reference. official source

SSP Main

Open-data reference.

PlainSafetyScore home → About this data

BALLSTON SPA, NY | Silicone rubber manufacturing

~73 avg employees | 7 years of OSHA data

C
Average Safety Record
Avg TCR
2.7
per 100 workers/yr
Industry Avg TCR
3.3
BLS benchmark
Total Injuries
14
across all years
Fatalities
0
across all years

SSP Main has an average TCR of 2.7, which is 81% of the industry average (3.3) for Silicone rubber manufacturing. This is better than average.

Safety Insights for SSP Main

SSP Main operates an establishment with approximately 73 full-time equivalent workers in BALLSTON SPA, NY, classified under the Silicone rubber manufacturing industry (NAICS 325212). Across 7 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 14 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 2.7 injuries per 100 full-time workers per year provides the anchor metric for the C letter grade (Average Safety Record).

Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Silicone rubber manufacturing, SSP Main's workforce experiences 81% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked — a 200,000-hour exposure base equals roughly 100 full-time workers — so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.

Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 7 reporting cycles points to systemic hazard exposure. Readers evaluating SSP Main as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries — there is no modeling, estimation, or third-party adjustment layered on top of the government data.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from SSP Main's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source — name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor — OSHA Establishment-Specific Injury and Illness Data. NAICS 325212 — Silicone rubber manufacturing.

DART Rate — Transparent Calculation (2024)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 161,563 hours worked = 0.00 DART

Methodology: 29 CFR 1904 — OSHA Form 300A recordkeeping

Cross-Validating Context — Establishment vs Industry vs State

Benchmark TCR Source
SSP Main (this establishment) 2.67 OSHA ITA Form 300A, 7-year avg
Fluoro rubbers manufacturing industry avg 3.30 BLS IIF, NAICS 325212
New York state avg (all industries) 20.55 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics — Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by SSP Main to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) — inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.0 0.0 0 0 0
2023 0.0 0.0 0 0 0
2022 6.6 2.6 5 0 0
2021 1.4 1.4 1 0 0
2020 8.2 2.7 6 0 0
2017 1.2 1.2 1 0 0
2016 1.3 1.3 1 0 0

Frequently Asked Questions

What is SSP Main's safety grade?
SSP Main has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 2.7 compared to the BLS industry benchmark of 3.3 for Silicone rubber manufacturing.
How is the safety grade calculated?
Safety grades are calculated by comparing an employer's average Total Case Rate (TCR) — the number of workplace injuries and illnesses per 100 full-time workers per year — against the Bureau of Labor Statistics (BLS) industry benchmark. Grade A means significantly below average injury rates; grade F means significantly above average.
How many injuries has SSP Main reported?
SSP Main has reported 14 total injuries and 0 fatalities across 7 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.
Where does PlainSafetyScore get its data?
All safety data comes from OSHA's Injury Tracking Application (ITA), which collects mandatory establishment-level injury and illness reports from employers with 250+ employees or those in high-hazard industries. Industry benchmarks are from the Bureau of Labor Statistics (BLS) Injuries, Illnesses, and Fatalities (IIF) program.

Explore More Safety Data

→ More employers in New York → Industry: Silicone rubber manufacturing → Safety grades explained → How to check employer safety → Understanding OSHA rates
Salary Data in New York
Compare wages across 800+ occupations — BLS data on WageDex
OSHA Enforcement Actions
See citations, penalties, and inspections on PlainWorker
AI Job Displacement Risk
Is this occupation at risk from AI? Check PlainWorkforce
H-2A Worker Safety
Farmworker visa employer safety data on PlainVisa
Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology — how this data is sourced, computed, and verified.

Related

Browse all → | Rankings →
Data sourced from official U.S. government datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial