Angle irons, metal, manufacturing · Indiana

StyleFab

Huntingburg, IN · ~26 workers · 9 years of OSHA Injury Tracking Application data.

D
Poor Safety Record
6.5
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

StyleFab runs at 197% of its industry's injury rate - more dangerous than the typical Angle irons, metal, manufacturing workplace, earning a grade D.

StyleFab: 6.5 TCR = 197% of Angle irons, metal, manufacturing BLS 3.3 · 9y Form 300A (see methodology below)

StyleFab safety composite

StyleFab scores strongest on dart rate (safer than 83% of same-industry peers) and weakest on total case rate (tcr) (safer than 29%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

53/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 6.49 per 100 workers

Safer than 29% of industry peers

DART rate
B 0 per 100 workers

Safer than 83% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−2.5

2016→2024

StyleFab injury rate improved

StyleFab's TCR fell 2.5 from 6.7 in 2016 to 4.2 in 2024. Peak filing year was 2018 at 13.1 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

2016=6.7 · 2017=6.7 · 2018=13.1 · 2019=0.0 · 2020=12.2 · 2021=11.7 · 2022=3.8 · 2023=0.0 · 2024=4.2

OSHA ITA Form 300A scorecard

Establishment book 332999 · Huntingburg, IN ABOVE-IND · SMALL

Grade D · TCR 6.5 · 197% of ind

  • DART 0.0 DART
  • RANK #25/47
  • PHOTO Standard Iron and Wi…
  • BOOK 9y book
  • INJ 16 inj
  • SIZE ~26 FTE

Nearest TCR peer: Standard Iron and Wire Works LLC (0.0 TCR gap)

Read with this employer → · Industry book → · Indiana employers → · Look up another →

StyleFab in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows StyleFab averages 6.5 TCR (197% of the Angle irons, metal, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

StyleFab TCR series: 2016=6.7 · 2017=6.7 · 2018=13.1 · 2019=0 · 2020=12.2 · 2021=11.7 · 2022=3.8 · 2023=0 · 2024=4.2 · BLS 3.3

Where StyleFab falls in its industry

827 Angle irons, metal, manufactur establishments

Safer than 29% of graded establishments in this industry, whose median TCR is 4.5.

More dangerous than peersSafer than peers

Narrower to Indiana alone (the establishments it most directly competes with for workers and contracts): ranked #25 safest of 47 Angle irons, metal, manufactur employers in Indiana.

StyleFab (26 employees, TCR 6.5) among 29 same-industry peers, split at the industry median of 67 employees and a TCR of 4.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400 0510152025 Average employees Total Case Rate StyleFab
StyleFab (26 employees, TCR 6.5) among 29 same-industry peers, split at the industry median of 67 employees and a TCR of 4.5

StyleFab has fewer employees than the Angle irons, metal, manufacturing median and a higher injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 4.2 0.0 1 0 0
2023 0.0 0.0 0 0 0
2022 3.8 3.8 1 0 0
2021 11.7 3.9 3 0 0
2020 12.2 4.1 3 0 0
2019 0.0 0.0 0 0 0
2018 13.1 6.5 4 0 0
2017 6.7 0.0 2 0 0
2016 6.7 0.0 2 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332999 · IN · Huntingburg

827 Angle irons, metal, manufacturing employers nationwide with a credible TCR · 12,750 rated employers in Indiana with headcount on file · 43 employers in Huntingburg, IN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Standard Iron and Wire Works LLC 6.5 TCR
NAICS-TCR Strong Hold Products 6.5 TCR
NAICS-TCR Manufacturing Facility 6.5 TCR
NAICS-TCR Kohler Co. Kitchen and Bath Cast Iron 6.5 TCR
STATE-SIZE Danville 26 FTE
STATE-SIZE Whitewater Valley REMC 26 FTE
STATE-SIZE Franklin(Pwr Del-IN) 26 FTE
STATE-SIZE Southern Indiana Power 26 FTE
CITY-NEAR Farbest Foods Huntingburg 729 FTE
CITY-NEAR OFS BRANDS CORPORATE OFFICE 314 FTE
CITY-NEAR Southwest Dubois County School Corporation 302 FTE
CITY-NEAR Huntingburg Operations 160 FTE
NAT-TCR CLARO / PRT - CAC Mayaguez 6.5 TCR
NAT-TCR LifeSource Natural Foods 6.5 TCR
NAT-TCR Lallypak Inc 6.5 TCR
NAT-TCR Lexington RSC 6.5 TCR
NAT-SIZE DK 26 FTE
NAT-SIZE McAlisterville 26 FTE
NAT-SIZE CLARO / PRT - CAC Plaza Rio Hondo 26 FTE
NAT-SIZE Wardell 26 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.