Precision turned product manufacturing · California

Swiss-Tech Machining, LLC

Roseville, CA · ~27 workers · 5 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.3
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Swiss-Tech Machining, LLC runs at 70% of its industry's injury rate - safer than the typical Precision turned product manufacturing workplace, earning a grade B.

Swiss-Tech Machining, LLC: 2.3 TCR = 70% of Precision turned product manufacturing BLS 3.3 · 5y Form 300A (see methodology below)

Swiss-Tech Machining, LLC safety composite

Swiss-Tech Machining, LLC scores strongest on total case rate (tcr) (safer than 72% of same-industry peers) and weakest on dart rate (safer than 21%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

49/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 2.32 per 100 workers

Safer than 72% of industry peers

DART rate
F 3.57 per 100 workers

Safer than 21% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Swiss-Tech Machining, LLC: 0.0 → 3.6 TCR

Peak year 2020 @ 4.2 TCR · DART/TCR 1.54× in 2024

Swiss-Tech Machining, LLC's TCR rose 3.6 from 0.0 in 2017 to 3.6 in 2024. Peak filing year was 2020 at 4.2 TCR. In 2024, DART was 1.54× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332721 · Roseville, CA AT/BELOW-IND · SMALL

Grade B · TCR 2.3 · 70% of ind

  • DART 3.6 DART
  • RANK #7/21
  • PHOTO SPM Industries
  • BOOK 5y book
  • INJ 3 inj
  • SIZE ~27 FTE

Nearest TCR peer: SPM Industries (0.0 TCR gap)

Read with this employer → · Industry book → · California employers → · Look up another →

Swiss-Tech Machining, LLC in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Swiss-Tech Machining, LLC averages 2.3 TCR (70% of the Precision turned product manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Swiss-Tech Machining, LLC TCR series: 2017=0 · 2018=3.8 · 2020=4.2 · 2023=0 · 2024=3.6 · BLS 3.3

Where Swiss-Tech Machining, LLC falls in its industry

464 Precision turned product manuf establishments

Safer than 72% of graded establishments in this industry, whose median TCR is 3.6.

More dangerous than peersSafer than peers

Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 21 Precision turned product manuf employers in California.

Swiss-Tech Machining, LLC (27 employees, TCR 2.3) among 29 same-industry peers, split at the industry median of 61 employees and a TCR of 3.6 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400 051015 Average employees Total Case Rate Swiss-Tech Machining, LLC
Swiss-Tech Machining, LLC (27 employees, TCR 2.3) among 29 same-industry peers, split at the industry median of 61 employees and a TCR of 3.6

Swiss-Tech Machining, LLC has fewer employees than the Precision turned product manufacturing median and a lower injury rate than the industry's median TCR of 3.6. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 3.6 3.6 1 0 0
2023 0.0 0.0 0 0 0
2020 4.2 0.0 1 0 0
2018 3.8 3.8 1 0 0
2017 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332721 · CA · Roseville

464 Precision turned product manufacturing employers nationwide with a credible TCR · 51,834 rated employers in California with headcount on file · 311 employers in Roseville, CA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR SPM Industries 2.3 TCR
NAICS-TCR Winslow Automatics, Inc 2.3 TCR
NAICS-TCR GENERAL TECHNOLOGIES - Seagoville 2.3 TCR
NAICS-TCR E.T. Precision Optics, Inc. 2.3 TCR
STATE-SIZE HQ 27 FTE
STATE-SIZE Medeiros Farms Vineyards 27 FTE
STATE-SIZE SAND RANCH 27 FTE
STATE-SIZE San Bernabe Vineyards 27 FTE
CITY-NEAR 2032-02121801 4,395 FTE
CITY-NEAR Sutter Valley Hospitals (30003) 4,383 FTE
CITY-NEAR 0206-02621801 3,172 FTE
CITY-NEAR Sutter Roseville Medical Center (110-5001) 3,162 FTE
NAT-TCR US Gypsum Auburn 2.3 TCR
NAT-TCR Deig Bros. Lumber & Construction Co., Inc. 2.3 TCR
NAT-TCR Headquarters 2.3 TCR
NAT-TCR Kissick Construction 2.3 TCR
NAT-SIZE S09328 - WMSS XOM Baton Rouge 27 FTE
NAT-SIZE Plainview-Elgin-Millville ISD#2899 27 FTE
NAT-SIZE S03259 - Bethel Landfill 27 FTE
NAT-SIZE S02932 - Richland Landfill 27 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2020, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.