Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants · Pennsylvania
TechSpec Inc., (TSI Titanium)
Derry, PA · ~72 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 10.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
TechSpec Inc., (TSI Titanium) runs at 318% of its industry's injury rate - far more dangerous than the typical Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants workplace, earning a grade F.
- F
- Failing Safety Record
- 10.5
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 15
- recordable injuries tracked
Grade compares TechSpec Inc., (TSI Titanium)'s OSHA Total Case Rate of 10.5 to the Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants BLS benchmark of 3.3 (318% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
TechSpec Inc., (TSI Titanium)'s yearly Total Case Rate, against the 3.3 industry benchmark.
Where TechSpec Inc., (TSI Titanium) falls in its industry
118 Bar, nonferrous metals (except establishmentsSafer than 4% of graded establishments in this industry, whose median TCR is 3.1.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #15 safest of 15 Bar, nonferrous metals (except employers in Pennsylvania.
Trend analysis for TechSpec Inc., (TSI Titanium)
Between 2017 and 2020, TechSpec Inc., (TSI Titanium)'s Total Case Rate improved from 11.8 to 9.2 recordable injuries per 100 full-time workers, a 22% decrease across 3 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 9.2, while 2017 saw the highest rate, at 11.8, a spread of 2.6 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, TechSpec Inc., (TSI Titanium) recorded 15 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 15 injuries shown on this page for TechSpec Inc., (TSI Titanium) are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331491 - Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants.
DART Rate, Transparent Calculation (2020)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
3 DART incidents × 200,000 ÷ 108,551 hours worked = 5.53 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| TechSpec Inc., (TSI Titanium) (this establishment) | 10.51 | OSHA ITA Form 300A, 2-year avg |
| Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants industry avg | 3.30 | BLS IIF, NAICS 331491 |
| Pennsylvania state avg (all industries) | 5.06 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by TechSpec Inc., (TSI Titanium) to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 10 reportable incidents · 10 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 9.2 | 5.5 | 5 | 0 | 0 |
| 2017 | 11.8 | 5.9 | 10 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on TechSpec Inc., (TSI Titanium)'s reported OSHA injury record versus its Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants peers, not a verdict on whether any single site is safe today.
- At 318% of the Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants benchmark, TechSpec Inc., (TSI Titanium) reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Bar, nonferrous metals (except aluminum, copper), made from purchased metals in wire drawing plants or in integrated secondary smelting and rolling, drawing, or extruding plants sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is TechSpec Inc., (TSI Titanium)'s safety grade?
How many injuries has TechSpec Inc., (TSI Titanium) reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Pennsylvania, and by nearby establishments in Derry - a different peer set than the category browse links below.
Similar TCR (~10.5)
Similar size (~72 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.