Aluminum alloys made from scrap or dross · Alabama
Tennessee Aluminum Processors, Inc.
Gadsden, AL · ~63 workers · 7 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Tennessee Aluminum Processors, Inc. runs at 123% of its industry's injury rate - more dangerous than the typical Aluminum alloys made from scrap or dross workplace, earning a grade D.
Tennessee Aluminum Processors, Inc.: 4.1 TCR = 123% of Aluminum alloys made from scrap or dross BLS 3.3 · 7y Form 300A (see methodology below)
Tennessee Aluminum Processors, Inc. safety composite
Tennessee Aluminum Processors, Inc. scores strongest on total case rate (tcr) (safer than 53% of same-industry peers) and weakest on dart rate (safer than 36%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
47/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.06 per 100 workers
Safer than 53% of industry peers
- DART rate
- D 2.31 per 100 workers
Safer than 36% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Tennessee Aluminum Processors, Inc. held a steady TCR band
Tennessee Aluminum Processors, Inc.'s TCR held near 0.3 from 5.4 in 2016 to 5.8 in 2024. Peak filing year was 2018 at 6.6 TCR. In 2024, DART was 0.57× this establishment's average TCR (severity share of cases).
2016=5.4 · 2018=6.6 · 2020=0.0 · 2021=4.8 · 2022=4.5 · 2023=1.4 · 2024=5.8
OSHA ITA Form 300A scorecard
Establishment book 331314 · Gadsden, AL ABOVE-IND · SMALL
Grade D · TCR 4.1 · 123% of ind
- DART 2.3 DART
- RANK #3/6
- PHOTO Ohio Valley Aluminum…
- BOOK 7y book
- INJ 18 inj
- SIZE ~63 FTE
Nearest TCR peer: Ohio Valley Aluminum Co, LLC (0.1 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Tennessee Aluminum Processors, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Hydro Monett
Hydro Monett
4.2 TCR
- Matalco Inc.
Matalco Inc.
4.2 TCR
- This site
Tennessee Aluminum Processors, Inc.
4.1 TCR
- Ohio Valley Al
Ohio Valley Aluminum Co, LLC
4 TCR
- Matalco Inc.
Matalco Inc.
4 TCR
What this shows Tennessee Aluminum Processors, Inc. averages 4.1 TCR (123% of the Aluminum alloys made from scrap or dross BLS benchmark).
Tennessee Aluminum Processors, Inc. TCR series: 2016=5.4 · 2018=6.6 · 2020=0 · 2021=4.8 · 2022=4.5 · 2023=1.4 · 2024=5.8 · BLS 3.3
Where Tennessee Aluminum Processors, Inc. falls in its industry
103 Aluminum alloys made from scra establishmentsSafer than 53% of graded establishments in this industry, whose median TCR is 4.2.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 6 Aluminum alloys made from scra employers in Alabama.
Tennessee Aluminum Processors, Inc. has fewer employees than the Aluminum alloys made from scrap or dross median and a lower injury rate than the industry's median TCR of 4.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 5.8 | 2.3 | 5 | 0 | 0 |
| 2023 | 1.4 | 1.4 | 1 | 0 | 0 |
| 2022 | 4.5 | 2.2 | 2 | 2 | 0 |
| 2021 | 4.8 | 3.6 | 3 | 1 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 6.6 | 3.9 | 4 | 1 | 0 |
| 2016 | 5.4 | 3.6 | 3 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331314 · AL · Gadsden
103 Aluminum alloys made from scrap or dross employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 82 employers in Gadsden, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Ohio Valley Aluminum Co, LLC | 4.0 TCR |
| NAICS-TCR | Hydro Monett | 4.2 TCR |
| NAICS-TCR | Matalco Inc. | 4.0 TCR |
| NAICS-TCR | Matalco Inc. | 4.2 TCR |
| STATE-SIZE | Central Generation | 63 FTE |
| STATE-SIZE | Southern Directional | 63 FTE |
| STATE-SIZE | BESDB Fairhope | 63 FTE |
| STATE-SIZE | ABRAMSON LLC | 63 FTE |
| CITY-NEAR | Goodyear Gadsden Alabama | 1,531 FTE |
| CITY-NEAR | Gadsden Regional Medical Center | 1,285 FTE |
| CITY-NEAR | Koch Foods Gadsden Processing Plant | 1,247 FTE |
| CITY-NEAR | Koch Foods Gadsden Plant | 850 FTE |
| NAT-TCR | Goodwill CFL - Deland | 4.1 TCR |
| NAT-TCR | Phillips Construction, LLC | 4.1 TCR |
| NAT-TCR | Pitt Ohio - Indianapolis | 4.1 TCR |
| NAT-TCR | construction - glass/glazing | 4.1 TCR |
| NAT-SIZE | Public Works | 63 FTE |
| NAT-SIZE | Chesapeake Construction | 63 FTE |
| NAT-SIZE | Longmont Plant | 63 FTE |
| NAT-SIZE | Precision Walls Inc-N.Charleston | 63 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.