Copper and copper-based shapes (e.g., cake, ingot, slag, wire bar) made from purchased metal or scrap · Ohio
The Federal Metal Company 7250
Bedford, OH · ~84 workers · 5 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
The Federal Metal Company 7250 runs at 163% of its industry's injury rate - more dangerous than the typical Copper and copper-based shapes (e.g., cake, ingot, slag, wire bar) made from purchased metal or scrap workplace, earning a grade D.
The Federal Metal Company 7250: 5.4 TCR = 163% of Copper and copper-based shapes (e.g., cake, ingot, slag, wire bar) made from purchased metal or scrap BLS 3.3 · 5y Form 300A (see methodology below)
The Federal Metal Company 7250 safety composite
The Federal Metal Company 7250 scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 16%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
32/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 5.38 per 100 workers
Safer than 33% of industry peers
- DART rate
- F 4.66 per 100 workers
Safer than 16% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
The Federal Metal Company 7250: 4.2 → 5.4 TCR
Peak year 2017 @ 6.4 TCR · DART/TCR 0.87× in 2020
The Federal Metal Company 7250's TCR rose 1.3 from 4.2 in 2016 to 5.4 in 2020. Peak filing year was 2017 at 6.4 TCR. In 2020, DART was 0.87× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 331420 · Bedford, OH ABOVE-IND · SMALL
Grade D · TCR 5.4 · 163% of ind
- DART 4.7 DART
- RANK #9/16
- PHOTO Alan Wire Company
- BOOK 5y book
- INJ 25 inj
- SIZE ~84 FTE
Nearest TCR peer: Alan Wire Company (0.0 TCR gap)
Read with this employer → · Industry book → · Ohio employers → · Look up another →
The Federal Metal Company 7250 in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
The Federal Metal Company 7250
5.4 TCR
- Alan Wire Comp
Alan Wire Company
5.4 TCR
- Kalas Plant 1
Kalas Plant 1 - K1
5.4 TCR
- Precision Tube
Precision Tube Company
5.3 TCR
- International
International Wire - Jordan Operations
5.3 TCR
What this shows The Federal Metal Company 7250 averages 5.4 TCR (163% of the Copper and copper-based shapes (e.g., cake, ingot, slag, wire bar) made from purchased metal or scrap BLS benchmark).
The Federal Metal Company 7250 TCR series: 2016=4.2 · 2017=6.4 · 2018=5.1 · 2019=5.8 · 2020=5.4 · BLS 3.3
Where The Federal Metal Company 7250 falls in its industry
198 Copper and copper-based shapes establishmentsSafer than 33% of graded establishments in this industry, whose median TCR is 3.7.
Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #9 safest of 16 Copper and copper-based shapes employers in Ohio.
The Federal Metal Company 7250 has fewer employees than the Copper and copper-based shapes (e.g., ca median and a higher injury rate than the industry's median TCR of 3.7. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 5.4 | 4.7 | 6 | 1 | 0 |
| 2019 | 5.8 | 2.5 | 7 | 0 | 0 |
| 2018 | 5.1 | 2.5 | 5 | 1 | 0 |
| 2017 | 6.4 | 3.9 | 4 | 1 | 0 |
| 2016 | 4.2 | 1.4 | 3 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331420 · OH · Bedford
198 Copper and copper-based shapes (e.g., cake, ingot, slag, wire bar) made from purchased metal or scrap employers nationwide with a credible TCR · 22,650 rated employers in Ohio with headcount on file · 24 employers in Bedford, OH · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Alan Wire Company | 5.4 TCR |
| NAICS-TCR | Kalas Plant 1 - K1 | 5.4 TCR |
| NAICS-TCR | Precision Tube Company | 5.3 TCR |
| NAICS-TCR | International Wire - Jordan Operations | 5.3 TCR |
| STATE-SIZE | Phillips Companies | 84 FTE |
| STATE-SIZE | Columbus Mound Street Service Center | 84 FTE |
| STATE-SIZE | GEM Industrial Inc. - Husky Energy, Lima | 84 FTE |
| STATE-SIZE | Bruns Building and Development and Ohio and Indiana Roofing | 84 FTE |
| CITY-NEAR | Bedford Medical Center | 350 FTE |
| CITY-NEAR | The Federal Metal Co. | 122 FTE |
| CITY-NEAR | GM Industrial | 117 FTE |
| CITY-NEAR | Kelley Steel Erectors, Inc. | 110 FTE |
| NAT-TCR | Augusta Biotest Plasma Center | 5.4 TCR |
| NAT-TCR | 399 - Ridgefield | 5.4 TCR |
| NAT-TCR | BlueLinx Corporation Charlotte | 5.4 TCR |
| NAT-TCR | Big Lots Store #4473 OILDALE, CA | 5.4 TCR |
| NAT-SIZE | South Oak Dodge, INC | 84 FTE |
| NAT-SIZE | The Roger Hotel | 84 FTE |
| NAT-SIZE | CCI:CC004 - CC004-New Mexico-Main Office | 84 FTE |
| NAT-SIZE | Rehab Hospital of Rhode Island | 84 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.