Architectural coatings (i.e., paint) manufacturing · Missouri
Tnemec Company NKC
North Kansas City, MO · ~184 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.2
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Tnemec Company NKC runs at 98% of its industry's injury rate - about level with the typical Architectural coatings (i.e., paint) manufacturing workplace, earning a grade C.
- C
- Average Safety Record
- 3.2
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 11
- recordable injuries tracked
Grade compares Tnemec Company NKC's OSHA Total Case Rate of 3.2 to the Architectural coatings (i.e., paint) manufacturing BLS benchmark of 3.3 (98% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Tnemec Company NKC's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Tnemec Company NKC falls in its industry
588 Architectural coatings (i.e., establishmentsSafer than 34% of graded establishments in this industry, whose median TCR is 2.2.
Narrower to Missouri alone (the establishments it most directly competes with for workers and contracts): ranked #8 safest of 15 Architectural coatings (i.e., employers in Missouri.
Trend analysis for Tnemec Company NKC
Between 2016 and 2024, Tnemec Company NKC's Total Case Rate held roughly steady from 3.5 to 3.6 recordable injuries per 100 full-time workers, a 4% increase across 8 years of OSHA reporting.
The safest year on record was 2023, at a TCR of 2.5, while 2024 saw the highest rate, at 3.6, a spread of 1.1 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 3 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 3 reporting years, Tnemec Company NKC recorded 11 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 11 injuries, 5 illnesses shown on this page for Tnemec Company NKC are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 325510 - Architectural coatings (i.e., paint) manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
7 DART incidents × 200,000 ÷ 383,355 hours worked = 3.65 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Tnemec Company NKC (this establishment) | 3.22 | OSHA ITA Form 300A, 3-year avg |
| Manufacturer, Paint & Coatings industry avg | 3.30 | BLS IIF, NAICS 325510 |
| Missouri state avg (all industries) | 4.57 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Tnemec Company NKC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 7 reportable incidents · 3 injuries, 4 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 5 reportable incidents · 4 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.6 | 3.6 | 3 | 4 | 0 |
| 2023 | 2.5 | 2.5 | 4 | 0 | 0 |
| 2016 | 3.5 | 2.1 | 4 | 1 | 0 |
What this grade means for you
Use this grade as a relative read on Tnemec Company NKC's reported OSHA injury record, strong versus its Architectural coatings (i.e., paint) manufacturing peers, but not a guarantee about any single site today.
- At 98% of the Architectural coatings (i.e., paint) manufacturing benchmark, Tnemec Company NKC reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Architectural coatings (i.e., paint) manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Tnemec Company NKC's safety grade?
How many injuries has Tnemec Company NKC reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Missouri, and by nearby establishments in North Kansas City - a different peer set than the category browse links below.
Similar TCR (~3.2)
Similar size (~184 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.