Custom compounding (i.e., blending and mixing) of purchased plastics resins · Georgia

TPM Dalton

Dalton, GA · ~27 workers · 9 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.2
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

TPM Dalton runs at 67% of its industry's injury rate - safer than the typical Custom compounding (i.e., blending and mixing) of purchased plastics resins workplace, earning a grade B.

TPM Dalton: 2.2 TCR = 67% of Custom compounding (i.e., blending and mixing) of purchased plastics resins BLS 3.3 · 9y Form 300A (see methodology below)

TPM Dalton safety composite

TPM Dalton scores strongest on dart rate (safer than 79% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

62/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
D 2.22 per 100 workers

Safer than 54% of industry peers

DART rate
B 0 per 100 workers

Safer than 79% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−3.7

2016→2024

TPM Dalton injury rate improved

TPM Dalton's TCR fell 3.7 from 3.7 in 2016 to 0.0 in 2024. Peak filing year was 2020 at 6.5 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

2016=3.7 · 2017=0.0 · 2018=0.0 · 2019=6.2 · 2020=6.5 · 2021=0.0 · 2022=3.6 · 2023=0.0 · 2024=0.0

OSHA ITA Form 300A scorecard

Establishment book 325991 · Dalton, GA AT/BELOW-IND · SMALL

Grade B · TCR 2.2 · 67% of ind

  • DART 0.0 DART
  • RANK #12/17
  • PHOTO Asahi Kasei Plastics…
  • BOOK 9y book
  • INJ 5 inj
  • SIZE ~27 FTE

Nearest TCR peer: Asahi Kasei Plastics Michigan (0.0 TCR gap)

Read with this employer → · Industry book → · Georgia employers → · Look up another →

TPM Dalton in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows TPM Dalton averages 2.2 TCR (67% of the Custom compounding (i.e., blending and mixing) of purchased plastics resins BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

TPM Dalton TCR series: 2016=3.7 · 2017=0 · 2018=0 · 2019=6.2 · 2020=6.5 · 2021=0 · 2022=3.6 · 2023=0 · 2024=0 · BLS 3.3

Where TPM Dalton falls in its industry

342 Custom compounding (i.e., blen establishments

Safer than 54% of graded establishments in this industry, whose median TCR is 2.5.

More dangerous than peersSafer than peers

Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #12 safest of 17 Custom compounding (i.e., blen employers in Georgia.

TPM Dalton (27 employees, TCR 2.2) among 29 same-industry peers, split at the industry median of 72 employees and a TCR of 2.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400500 05101520 Average employees Total Case Rate TPM Dalton
TPM Dalton (27 employees, TCR 2.2) among 29 same-industry peers, split at the industry median of 72 employees and a TCR of 2.5

TPM Dalton has fewer employees than the Custom compounding (i.e., blending and m median and a lower injury rate than the industry's median TCR of 2.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.0 0.0 0 0 0
2023 0.0 0.0 0 0 0
2022 3.6 0.0 1 0 0
2021 0.0 0.0 0 0 0
2020 6.5 0.0 1 1 0
2019 6.2 6.2 2 0 0
2018 0.0 0.0 0 0 0
2017 0.0 0.0 0 0 0
2016 3.7 3.7 1 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

325991 · GA · Dalton

342 Custom compounding (i.e., blending and mixing) of purchased plastics resins employers nationwide with a credible TCR · 14,941 rated employers in Georgia with headcount on file · 292 employers in Dalton, GA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Asahi Kasei Plastics Michigan 2.2 TCR
NAICS-TCR Teknor Apex Company - Rhode Island 2.3 TCR
NAICS-TCR RTP COMPANY-SOUTH BOSTON 2.2 TCR
NAICS-TCR Sylvin Technologies Inc 2.3 TCR
STATE-SIZE Canon Pullet Farm 27 FTE
STATE-SIZE AKA Mulch Products, LLC 27 FTE
STATE-SIZE Grow Out 27 FTE
STATE-SIZE Piedmont Water Company 27 FTE
CITY-NEAR Hamilton Medical Center 1,606 FTE
CITY-NEAR Plant 97 1,244 FTE
CITY-NEAR SD 1,224 FTE
CITY-NEAR USA Dalton GA Antioch 1,077 FTE
NAT-TCR DSC1 Logistics 2.2 TCR
NAT-TCR Community Development 2.2 TCR
NAT-TCR Pittsburg Plant 2.2 TCR
NAT-TCR Hampton Inn Farmington 2.2 TCR
NAT-SIZE Silver Creek Terrace 27 FTE
NAT-SIZE EGM-McCarran 27 FTE
NAT-SIZE Morgan City Terminal 27 FTE
NAT-SIZE Med Express - SVSU 27 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.