Injection molding machinery for plastics manufacturing · Pennsylvania
Tri-Tech Molding
Mckean, PA · ~45 workers · 7 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Tri-Tech Molding runs at 95% of its industry's injury rate - about level with the typical Injection molding machinery for plastics manufacturing workplace, earning a grade C.
Tri-Tech Molding: 3.1 TCR = 95% of Injection molding machinery for plastics manufacturing BLS 3.3 · 7y Form 300A (see methodology below)
Tri-Tech Molding safety composite
Tri-Tech Molding scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 23%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
39/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 3.12 per 100 workers
Safer than 47% of industry peers
- DART rate
- F 2.86 per 100 workers
Safer than 23% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−2.9
2016→2022
Tri-Tech Molding injury rate improved
Tri-Tech Molding's TCR fell 2.9 from 5.7 in 2016 to 2.9 in 2022. Peak filing year was 2016 at 5.7 TCR. In 2022, DART was 0.92× this establishment's average TCR (severity share of cases).
2016=5.7 · 2017=4.3 · 2018=1.6 · 2019=1.7 · 2020=0.0 · 2021=5.7 · 2022=2.9
OSHA ITA Form 300A scorecard
Establishment book 333249 · Mckean, PA AT/BELOW-IND · SMALL
Grade C · TCR 3.1 · 95% of ind
- DART 2.9 DART
- RANK #18/33
- PHOTO Sturgis Molded Produ…
- BOOK 7y book
- INJ 12 inj
- SIZE ~45 FTE
Nearest TCR peer: Sturgis Molded Products (0.0 TCR gap)
Read with this employer → · Industry book → · Pennsylvania employers → · Look up another →
Tri-Tech Molding in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Tri-Tech Molding
3.1 TCR
- Sturgis Molded
Sturgis Molded Products
3.1 TCR
- Harmony System
Harmony Systems & Service LLC
3.1 TCR
- SPXFLOW Delava
SPXFLOW Delavan Operations
3.1 TCR
- Sono-Tek Corpo
Sono-Tek Corporation
3.1 TCR
What this shows Tri-Tech Molding averages 3.1 TCR (95% of the Injection molding machinery for plastics manufacturing BLS benchmark).
Tri-Tech Molding TCR series: 2016=5.7 · 2017=4.3 · 2018=1.6 · 2019=1.7 · 2020=0 · 2021=5.7 · 2022=2.9 · BLS 3.3
Where Tri-Tech Molding falls in its industry
448 Injection molding machinery fo establishmentsSafer than 47% of graded establishments in this industry, whose median TCR is 3.0.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #18 safest of 33 Injection molding machinery fo employers in Pennsylvania.
Tri-Tech Molding has fewer employees than the Injection molding machinery for plastics median and a higher injury rate than the industry's median TCR of 3.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2022 | 2.9 | 2.9 | 1 | 0 | 0 |
| 2021 | 5.7 | 0.0 | 2 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 1.7 | 0.0 | 1 | 0 | 0 |
| 2018 | 1.6 | 1.6 | 1 | 0 | 0 |
| 2017 | 4.3 | 2.9 | 3 | 0 | 0 |
| 2016 | 5.7 | 5.7 | 4 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
333249 · PA · Mckean
448 Injection molding machinery for plastics manufacturing employers nationwide with a credible TCR · 22,692 rated employers in Pennsylvania with headcount on file · 3 employers in Mckean, PA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Sturgis Molded Products | 3.1 TCR |
| NAICS-TCR | Harmony Systems & Service LLC | 3.1 TCR |
| NAICS-TCR | SPXFLOW Delavan Operations | 3.1 TCR |
| NAICS-TCR | Sono-Tek Corporation | 3.1 TCR |
| STATE-SIZE | DocHouse | 45 FTE |
| STATE-SIZE | Florin Farms Hatchery, Inc. | 45 FTE |
| STATE-SIZE | Risser's Poultry, Inc. | 45 FTE |
| STATE-SIZE | Valley | 45 FTE |
| CITY-NEAR | Plyler Entry Systems | 45 FTE |
| CITY-NEAR | TRI TECH INJECTION MOLDING | 31 FTE |
| NAT-TCR | Glendale Heights Il Depot | 3.1 TCR |
| NAT-TCR | Price Less Foods #18 | 3.1 TCR |
| NAT-TCR | KLS Berner Foods IL | 3.1 TCR |
| NAT-TCR | Smilow Cancer Center | 3.1 TCR |
| NAT-SIZE | HG314 | 45 FTE |
| NAT-SIZE | DG Service - Florida | 45 FTE |
| NAT-SIZE | Signature Flight Support-PWK269 | 45 FTE |
| NAT-SIZE | HG085 | 45 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.