Metal stampings (except automotive, cans, coins), unfinished, manufacturing · Texas
Universal Metal Products, Inc., Pharr Division
Pharr, TX · ~63 workers · 2 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Universal Metal Products, Inc., Pharr Division runs at 145% of its industry's injury rate - more dangerous than the typical Metal stampings (except automotive, cans, coins), unfinished, manufacturing workplace, earning a grade D.
Universal Metal Products, Inc., Pharr Division: 4.8 TCR = 145% of Metal stampings (except automotive, cans, coins), unfinished, manufacturing BLS 3.3 · 2y Form 300A (see methodology below)
Universal Metal Products, Inc., Pharr Division safety composite
Universal Metal Products, Inc., Pharr Division scores strongest on total case rate (tcr) (safer than 53% of same-industry peers) and weakest on dart rate (safer than 15%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
39/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.77 per 100 workers
Safer than 53% of industry peers
- DART rate
- F 5.3 per 100 workers
Safer than 15% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Universal Metal Products, Inc., Pharr Division: 4.2 → 5.3 TCR
Peak year 2024 @ 5.3 TCR · DART/TCR 1.11× in 2024
Universal Metal Products, Inc., Pharr Division's TCR rose 1.1 from 4.2 in 2022 to 5.3 in 2024. In 2024, DART was 1.11× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332119 · Pharr, TX ABOVE-IND · SMALL
Grade D · TCR 4.8 · 145% of ind
- DART 5.3 DART
- RANK #11/22
- PHOTO Bingaman - Precision…
- BOOK 2y book
- INJ 7 inj
- SIZE ~63 FTE
Nearest TCR peer: Bingaman - Precision Metal Spinning Corp. (0.0 TCR gap)
Read with this employer → · Industry book → · Texas employers → · Look up another →
Universal Metal Products, Inc., Pharr Division in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Universal Metal Products, Inc., Pharr Division
4.8 TCR
- Bingaman - Pre
Bingaman - Precision Metal Spinning Corp.
4.8 TCR
- Wrico Stamping
Wrico Stamping of Arizona
4.8 TCR
- Wrico Stamping
Wrico Stamping of Wisconsin
4.8 TCR
- P&G Steel Prod
P&G Steel Products Co., Inc.
4.7 TCR
What this shows Universal Metal Products, Inc., Pharr Division averages 4.8 TCR (145% of the Metal stampings (except automotive, cans, coins), unfinished, manufacturing BLS benchmark).
Universal Metal Products, Inc., Pharr Division TCR series: 2022=4.2 · 2024=5.3 · BLS 3.3
Where Universal Metal Products, Inc., Pharr Division falls in its industry
477 Metal stampings (except automo establishmentsSafer than 53% of graded establishments in this industry, whose median TCR is 5.1.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #11 safest of 22 Metal stampings (except automo employers in Texas.
Universal Metal Products, Inc., Pharr Division has more employees than the Metal stampings (except automotive, cans median and a lower injury rate than the industry's median TCR of 5.1. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 5.3 | 5.3 | 4 | 0 | 0 |
| 2022 | 4.2 | 2.8 | 3 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332119 · TX · Pharr
477 Metal stampings (except automotive, cans, coins), unfinished, manufacturing employers nationwide with a credible TCR · 38,394 rated employers in Texas with headcount on file · 83 employers in Pharr, TX · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Bingaman - Precision Metal Spinning Corp. | 4.8 TCR |
| NAICS-TCR | Wrico Stamping of Arizona | 4.8 TCR |
| NAICS-TCR | Wrico Stamping of Wisconsin | 4.8 TCR |
| NAICS-TCR | P&G Steel Products Co., Inc. | 4.7 TCR |
| STATE-SIZE | Sanderson Farms Brazos Hatchery | 63 FTE |
| STATE-SIZE | Radiation Detection Company | 63 FTE |
| STATE-SIZE | DuPont Pioneer Plainview PLA1 | 63 FTE |
| STATE-SIZE | NAES : Major Oak Power | 63 FTE |
| CITY-NEAR | Dragados-Pulice Joint Venture | 278 FTE |
| CITY-NEAR | Pharr, TX | 271 FTE |
| CITY-NEAR | Donna Office | 222 FTE |
| CITY-NEAR | 1108 - PHARR TX WHSE | 192 FTE |
| NAT-TCR | Crown Boiler | 4.8 TCR |
| NAT-TCR | SIMONA America Industries | 4.8 TCR |
| NAT-TCR | Ackert Park Skilled Nursing Rehabilitation Center | 4.8 TCR |
| NAT-TCR | 3505 Las Cruces | 4.8 TCR |
| NAT-SIZE | IFTY Amz DAT9 | 63 FTE |
| NAT-SIZE | 7102110 FPL Big Cypress | 63 FTE |
| NAT-SIZE | Albany State University Radium Campus | 63 FTE |
| NAT-SIZE | UniSite Design | 63 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.