All other misc fabricated metal product mfg · Texas
US039: Allied and Cope Houston
Houston, TX · ~50 workers · 5 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.8
- Avg TCR
- 3.3
- Industry avg
- 1
- Fatality
The verdict
US039: Allied and Cope Houston runs at 146% of its industry's injury rate - more dangerous than the typical All other misc fabricated metal product mfg workplace, earning a grade D.
- D
- Poor Safety Record
- 4.8
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 1
- worker fatalities on record
Grade compares US039: Allied and Cope Houston's OSHA Total Case Rate of 4.8 to the All other misc fabricated metal product mfg BLS benchmark of 3.3 (146% of benchmark) across 5 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
US039: Allied and Cope Houston's yearly Total Case Rate, against the 3.3 industry benchmark.
Where US039: Allied and Cope Houston falls in its industry
880 All other misc fabricated meta establishmentsSafer than 42% of graded establishments in this industry, whose median TCR is 4.2.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #34 safest of 43 All other misc fabricated meta employers in Texas.
Trend analysis for US039: Allied and Cope Houston
Between 2017 and 2021, US039: Allied and Cope Houston's Total Case Rate worsened from 2.9 to 5.9 recordable injuries per 100 full-time workers, a 103% increase across 4 years of OSHA reporting.
The safest year on record was 2017, at a TCR of 2.9, while 2020 saw the highest rate, at 6.9, a spread of 4.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 5 reporting years, US039: Allied and Cope Houston recorded 14 total injuries and illnesses and 1 fatality. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 14 injuries, and 1 fatality shown on this page for US039: Allied and Cope Houston are sourced from its own 5 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332999 - All other misc fabricated metal product mfg.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 136,450 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| US039: Allied and Cope Houston (this establishment) | 4.82 | OSHA ITA Form 300A, 5-year avg |
| Machine bases, metal, manufacturing industry avg | 3.30 | BLS IIF, NAICS 332999 |
| Texas state avg (all industries) | 3.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by US039: Allied and Cope Houston to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 4 reportable incidents · 3 injuries, 0 illnesses, 1 fatality - OSHA inspection records (case numbers)
- 2018: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 5.9 | 0.0 | 4 | 0 | 0 |
| 2020 | 6.9 | 0.0 | 4 | 0 | 0 |
| 2019 | 4.8 | 1.6 | 3 | 0 | 1 |
| 2018 | 3.6 | 3.6 | 2 | 0 | 0 |
| 2017 | 2.9 | 0.0 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on US039: Allied and Cope Houston's reported OSHA injury record versus its All other misc fabricated metal product mfg peers, not a verdict on whether any single site is safe today.
- At 146% of the All other misc fabricated metal product mfg benchmark, US039: Allied and Cope Houston reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider All other misc fabricated metal product mfg sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is US039: Allied and Cope Houston's safety grade?
How many injuries has US039: Allied and Cope Houston reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Texas, and by nearby establishments in Houston - a different peer set than the category browse links below.
Similar TCR (~4.8)
Similar size (~50 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.