Angle irons, metal, manufacturing · Indiana
Avilla Fabrication
Avilla, IN · ~61 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Avilla Fabrication runs at 146% of its industry's injury rate - more dangerous than the typical Angle irons, metal, manufacturing workplace, earning a grade D.
Avilla Fabrication: 4.8 TCR = 146% of Angle irons, metal, manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
Avilla Fabrication safety composite
Avilla Fabrication scores strongest on dart rate (safer than 83% of same-industry peers) and weakest on total case rate (tcr) (safer than 45%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
60/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.81 per 100 workers
Safer than 45% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 83% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Avilla Fabrication: 1.8 → 6.9 TCR
Peak year 2021 @ 6.9 TCR · DART/TCR 0× in 2024
Avilla Fabrication's TCR rose 5.1 from 1.8 in 2016 to 6.9 in 2024. Peak filing year was 2021 at 6.9 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332999 · Avilla, IN ABOVE-IND · SMALL
Grade D · TCR 4.8 · 146% of ind
- DART 0.0 DART
- RANK #20/47
- PHOTO LeMar Industries-SHE
- BOOK 9y book
- INJ 27 inj
- SIZE ~61 FTE
Nearest TCR peer: LeMar Industries-SHE (0.0 TCR gap)
Read with this employer → · Industry book → · Indiana employers → · Look up another →
Avilla Fabrication in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Avilla Fabrication
4.8 TCR
- LeMar Industri
LeMar Industries-SHE
4.8 TCR
- Kitchen Fabric
Kitchen Fabricating Equipment - Counter Craft
4.8 TCR
- Hose Master -
Hose Master - Atlanta GA
4.8 TCR
- US039: Allied
US039: Allied and Cope Houston
4.8 TCR
What this shows Avilla Fabrication averages 4.8 TCR (146% of the Angle irons, metal, manufacturing BLS benchmark).
Avilla Fabrication TCR series: 2016=1.8 · 2017=5.7 · 2018=4 · 2019=2.8 · 2020=5.2 · 2021=6.9 · 2022=3.2 · 2023=6.9 · 2024=6.9 · BLS 3.3
Where Avilla Fabrication falls in its industry
827 Angle irons, metal, manufactur establishmentsSafer than 45% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Indiana alone (the establishments it most directly competes with for workers and contracts): ranked #20 safest of 47 Angle irons, metal, manufactur employers in Indiana.
Avilla Fabrication has fewer employees than the Angle irons, metal, manufacturing median and a higher injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 6.9 | 0.0 | 4 | 0 | 0 |
| 2023 | 6.9 | 0.0 | 4 | 0 | 0 |
| 2022 | 3.2 | 0.0 | 2 | 0 | 0 |
| 2021 | 6.9 | 0.0 | 4 | 0 | 0 |
| 2020 | 5.2 | 0.0 | 3 | 0 | 0 |
| 2019 | 2.8 | 0.0 | 2 | 0 | 0 |
| 2018 | 4.0 | 0.0 | 3 | 0 | 0 |
| 2017 | 5.7 | 2.8 | 4 | 0 | 0 |
| 2016 | 1.8 | 0.0 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332999 · IN · Avilla
827 Angle irons, metal, manufacturing employers nationwide with a credible TCR · 12,750 rated employers in Indiana with headcount on file · 12 employers in Avilla, IN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | LeMar Industries-SHE | 4.8 TCR |
| NAICS-TCR | Kitchen Fabricating Equipment - Counter Craft | 4.8 TCR |
| NAICS-TCR | Hose Master - Atlanta GA | 4.8 TCR |
| NAICS-TCR | US039: Allied and Cope Houston | 4.8 TCR |
| STATE-SIZE | ABI Attachments, Inc. | 61 FTE |
| STATE-SIZE | Fort Wayne NE Service Center | 61 FTE |
| STATE-SIZE | 358-NiSource-Valparaiso Eastport Center | 61 FTE |
| STATE-SIZE | 165-NiSource-Hammond IN-El Disp Cont Ctr | 61 FTE |
| CITY-NEAR | Kautex Avilla | 334 FTE |
| CITY-NEAR | Group Dekko Avilla | 128 FTE |
| CITY-NEAR | AHSCM44 ASCENSION LIVING SACRED HEART VILLAGE | 117 FTE |
| CITY-NEAR | 1855-AHSCM44 | 108 FTE |
| NAT-TCR | Newport News Shipbuilding - Division of Huntington Ingalls Industries | 4.8 TCR |
| NAT-TCR | AdventHealth North Pinellas | 4.8 TCR |
| NAT-TCR | Empire Truck Sales - Slidell | 4.8 TCR |
| NAT-TCR | Munson Home Services | 4.8 TCR |
| NAT-SIZE | Superior Aluminum Products Inc | 61 FTE |
| NAT-SIZE | Electric Division | 61 FTE |
| NAT-SIZE | Hw Public Safety | 61 FTE |
| NAT-SIZE | The Fresh Market 003 | 61 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.