General warehousing and storage · Pennsylvania
USJT Ingram Micro Inc Jonestown
Jonestown, PA · ~598 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 7.0
- Avg TCR
- 5.8
- Industry avg
- 0
- Fatalities
The verdict
USJT Ingram Micro Inc Jonestown runs at 122% of its industry's injury rate - more dangerous than the typical General warehousing and storage workplace, earning a grade D.
- D
- Poor Safety Record
- 7.0
- avg TCR · per 100 workers
- 5.8
- industry benchmark (BLS)
- 111
- recordable injuries tracked
Grade compares USJT Ingram Micro Inc Jonestown's OSHA Total Case Rate of 7.0 to the General warehousing and storage BLS benchmark of 5.8 (122% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
USJT Ingram Micro Inc Jonestown's yearly Total Case Rate, against the 5.8 industry benchmark.
Where USJT Ingram Micro Inc Jonestown falls in its industry
10,728 General warehousing and storag establishmentsSafer than 17% of graded establishments in this industry, whose median TCR is 3.0.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #552 safest of 693 General warehousing and storag employers in Pennsylvania.
Trend analysis for USJT Ingram Micro Inc Jonestown
Between 2019 and 2021, USJT Ingram Micro Inc Jonestown's Total Case Rate held roughly steady from 7.1 to 7.3 recordable injuries per 100 full-time workers, a 3% increase across 2 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 6.8, while 2021 saw the highest rate, at 7.3, a spread of 0.5 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 3 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 3 reporting years, USJT Ingram Micro Inc Jonestown recorded 111 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 111 injuries, 6 illnesses shown on this page for USJT Ingram Micro Inc Jonestown are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 493110 - General warehousing and storage.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
36 DART incidents × 200,000 ÷ 1,125,775 hours worked = 6.40 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| USJT Ingram Micro Inc Jonestown (this establishment) | 7.05 | OSHA ITA Form 300A, 3-year avg |
| Warehousing and storage, general merchandise industry avg | 5.80 | BLS IIF, NAICS 493110 |
| Pennsylvania state avg (all industries) | 5.06 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by USJT Ingram Micro Inc Jonestown to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 41 reportable incidents · 39 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 41 reportable incidents · 37 injuries, 4 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 35 reportable incidents · 35 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 7.3 | 6.4 | 39 | 2 | 0 |
| 2020 | 6.8 | 6.8 | 37 | 4 | 0 |
| 2019 | 7.1 | 6.5 | 35 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on USJT Ingram Micro Inc Jonestown's reported OSHA injury record versus its General warehousing and storage peers, not a verdict on whether any single site is safe today.
- At 122% of the General warehousing and storage benchmark, USJT Ingram Micro Inc Jonestown reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider General warehousing and storage sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is USJT Ingram Micro Inc Jonestown's safety grade?
How many injuries has USJT Ingram Micro Inc Jonestown reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Pennsylvania, and by nearby establishments in Jonestown - a different peer set than the category browse links below.
Similar TCR (~7.0)
Similar size (~598 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.