Nonferrous metal shapes (except aluminum, copper) made by rolling, drawing, or extruding purchased nonferrous metal · New Jersey
VDM Metals USA, LLC
Florham Park, NJ · ~105 workers · 8 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
VDM Metals USA, LLC runs at 94% of its industry's injury rate - about level with the typical Nonferrous metal shapes (except aluminum, copper) made by rolling, drawing, or extruding purchased nonferrous metal workplace, earning a grade C.
VDM Metals USA, LLC: 3.1 TCR = 94% of Nonferrous metal shapes (except aluminum, copper) made by rolling, drawing, or extruding purchased nonferrous metal BLS 3.3 · 8y Form 300A (see methodology below)
VDM Metals USA, LLC safety composite
VDM Metals USA, LLC scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 42%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
47/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 3.11 per 100 workers
Safer than 50% of industry peers
- DART rate
- D 2.32 per 100 workers
Safer than 42% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
VDM Metals USA, LLC: 1.9 → 3.1 TCR
Peak year 2018 @ 6.4 TCR · DART/TCR 0.75× in 2024
VDM Metals USA, LLC's TCR rose 1.1 from 1.9 in 2016 to 3.1 in 2024. Peak filing year was 2018 at 6.4 TCR. In 2024, DART was 0.75× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 331491 · Florham Park, NJ AT/BELOW-IND · MID
Grade C · TCR 3.1 · 94% of ind
- DART 2.3 DART
- RANK P50
- PHOTO Jamestown North Amer…
- BOOK 8y book
- INJ 27 inj
- SIZE ~105 FTE
Nearest TCR peer: Jamestown North America (0.0 TCR gap)
Read with this employer → · Industry book → · New Jersey employers → · Look up another →
VDM Metals USA, LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
VDM Metals USA, LLC
3.1 TCR
- Jamestown Nort
Jamestown North America
3.1 TCR
- Goldman Titani
Goldman Titanium, Inc.
3.1 TCR
- Specialty Meta
Specialty Metals Plant
3.1 TCR
- Haynes Interna
Haynes International
3.1 TCR
What this shows VDM Metals USA, LLC averages 3.1 TCR (94% of the Nonferrous metal shapes (except aluminum, copper) made by rolling, drawing, or extruding purchased nonferrous metal BLS benchmark).
VDM Metals USA, LLC TCR series: 2016=1.9 · 2018=6.4 · 2019=6.2 · 2020=1.1 · 2021=0 · 2022=4.5 · 2023=1.7 · 2024=3.1 · BLS 3.3
Where VDM Metals USA, LLC falls in its industry
113 Nonferrous metal shapes (excep establishmentsSafer than 50% of graded establishments in this industry, whose median TCR is 3.1.
VDM Metals USA, LLC has more employees than the Nonferrous metal shapes (except aluminum median and a lower injury rate than the industry's median TCR of 3.1. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.1 | 2.3 | 4 | 0 | 0 |
| 2023 | 1.7 | 1.7 | 2 | 0 | 0 |
| 2022 | 4.5 | 4.5 | 4 | 1 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 1.1 | 1.1 | 1 | 0 | 0 |
| 2019 | 6.2 | 5.3 | 7 | 0 | 0 |
| 2018 | 6.4 | 5.5 | 7 | 0 | 0 |
| 2016 | 1.9 | 1.0 | 2 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331491 · NJ · Florham Park
113 Nonferrous metal shapes (except aluminum, copper) made by rolling, drawing, or extruding purchased nonferrous metal employers nationwide with a credible TCR · 11,201 rated employers in New Jersey with headcount on file · 38 employers in Florham Park, NJ · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Jamestown North America | 3.1 TCR |
| NAICS-TCR | Goldman Titanium, Inc. | 3.1 TCR |
| NAICS-TCR | Specialty Metals Plant | 3.1 TCR |
| NAICS-TCR | Haynes International | 3.1 TCR |
| STATE-SIZE | UTY - New Jersey - Haworth,NJ | 105 FTE |
| STATE-SIZE | WWF Operating Company | 105 FTE |
| STATE-SIZE | Bergen Baking, LLC. | 105 FTE |
| STATE-SIZE | Arna marketing | 105 FTE |
| CITY-NEAR | Florham Park | 1,436 FTE |
| CITY-NEAR | LOCATION 40017 | 1,247 FTE |
| CITY-NEAR | Pritchard Industries, LLC. - NJ | 1,173 FTE |
| CITY-NEAR | Atlantic Mobile Health - Atlantic Ambulance | 713 FTE |
| NAT-TCR | Warsaw Facility | 3.1 TCR |
| NAT-TCR | TSE Las Vegas | 3.1 TCR |
| NAT-TCR | Ericstad, LLC | 3.1 TCR |
| NAT-TCR | Kawasaki Motors Manufacturing Corp., U.S.A., Consumer Products | 3.1 TCR |
| NAT-SIZE | Lagniappe Healthcare, LLC | 105 FTE |
| NAT-SIZE | Sodexo at Vincennes Univ Board Operation | 105 FTE |
| NAT-SIZE | Sodexo at Northwestern St University | 105 FTE |
| NAT-SIZE | Melham Medical Center | 105 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.